Pressure Washer Accessories
PRESSURE WASHER ACCESSORIES, SPRAY NOZZLE ASSORTMENT, 4.5MM, 5 PIECE - The job pack includes one-each stainless steel Blasting (0° - red), Chiseling (15° - yellow), Flushing (25° - green), and Washing (40° - white) QC spray nozzles, and one brass Soap (65° - black) QC spray nozzle.
SOAP STRAINER FOR 1/"4 OR 3/8" HOSE - Chemical strainer with built-in stainless steel check valve and step down hose barb to attach either 1/4 inch (6.35 mm) or 3/8 inch (9.53 mm) hoses. Attach the strainer to the hose and place it in the soap container. The strainer has an internal brass weight that keeps the strainer at the bottom of the container.
PRESSURE WASHER ACCESSORIES, NOZZLE, ROTATING TURBO NOZZLE, 4.5MM ORIFICE WITH 1/4" F-NATIONAL PIPE THREAD INLET, 3600 PSI
PRESSURE WASHER ACCESSORIES, QUICK CONNECT WASH NOZZLE, 40X4.5MM. WHITE
PRESSURE WASHER ACCESSORIES, QUICK CONNECT CHISELING NOZZLE, 15X5.5MM. YELLOW
PRESSURE WASHER ACCESSORIES, QUICK CONNECT BLASTING NOZZLE, 0X4.5MM. RED
50' 6000-PSI PRESSURE WASHER HOSE-FTGPW6000SR50X >
100' 6000-PSI PRESSURE WASHER HOSE-FTGPW6000SR100X >
3/8" 6000 PSI PRESSURE WASHER HOSE-FTGPW6000FT >
100' 4000-PSI PRESSURE WASHER HOSE-FTGPW4500SR100X >
3/8" X 50' PRESSURE WASHER HOSE - FTGPW4000SR50X>
3/8" X 100-FT PRESSURE WASHER HOSE-FTGPW4000SR100X>
50' 4000-PSI PRESSURE WASHER HOSE-FTGPW4000BSR50X >
50' BLACK PRESSURE WASHER HOSE-FTGPW3000SR50X >
100' BLACK PRESSURE WASHER HOSE-FTGPW3000SR100X >
PRESSURE WASHER ACCESSORIES, INLET WATER STRAINER, 1/2" F-NATIONAL PIPE THREAD INLET, 1/2" M-NATIONAL PIPE THREAD OUTLET - The strainer is placed between the garden hose and the pressure washer to prevent debris from entering the pump from the water source. The inlet filter replaces the garden hose small filter screen.
High-Pressure Hose, Premium Grade, 3/8 inch x 50ft Hose FOR75183
PRESSURE WASHER ACCESSORIES, HOSE, 3/8" X 50' HIGH PRESSURE 3000 PSI - 3/8 inch (9.53 mm) Male National Pipe Thread (MNPT) solid fitting and one 3/8 inch (9.53 mm) MNPT swivel fitting.
PRESSURE WASHER ACCESSORIES, NOZZLE HI-PRESSURE ROTATING TURBO NOZZLE, 4.5MM ORIFICE WITH 1/4" F-NATIONAL PIPE THREAD INLET, 5100 PSI
PRESSURE WASHER PRESSURE SWITCHES-ALKF0400762>
30' 2400-PSI PRESSURE WASHER HOSE-JWH798457 >
2400 PSI PRESURE WASHER-JWH793358>
PRESSURE WASHER WATER BROOM-JWH790093>
PINT HD30 PUMP OIL-JWH788618 >
M22 X 14MM X 3/8" POWER WASHER CONNECTOR-JWH786885>
Recently Viewed
BBI 042074 Fully Threaded Cap Screw, 5/16-18, 3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042074 Fully Threaded Cap Screw, 5/16-18, 3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
nVent ERICO 815880UPC Pointed Ground Rod, 5/8 in Nominal, 8 ft OAL, Steel, Hot Dip Galvanized
nVent ERICO 815880UPC Pointed Ground Rod, 5/8 in Nominal, 8 ft OAL, Steel, Hot Dip Galvanized
Milwaukee® 2136-21 M18™ ROCKET™ Tower Light/Charger Kit With 2.1 A USB Charging, LED Lamp, 18 V, 3 Heads
The MILWAUKEE® M18™ ROCKET™ Tower Light/Charger Kit is designed to deliver a lighting solution that adapts, performs, and survives to the jobsite. This light tower sets up in seconds to a max height of 7' and collapses to less than 4' for easy transportation and storage. The LED light head can be extended from 4-7' to light overhead work or minimize shadows when casting shine downward. The multidirectional light head allows users to orient the three independently pivoting light heads to cast light in several directions. The integrated AC plug allows the light to be plugged in with a standard extension cord and charges any M18™ REDLITHIUM™ pack or use the USB port to charge devices on site. Delivering 6,000 lumens, it fills up large areas with TRUEVIEW™ High Definition light. For optimized control over the output and run-time, the M18™ ROCKET™ LED Light has three output settings. The LEDs never need to be replaced and are backed by a limited lifetime warranty. The tower light kit includes the M18™ ROCKET™ Tower Light/Charger, (1) M18™ REDLITHIUM™ 8.0 Battery, and a Carrying Bag.
PRECISION BRAND 42930-- 300 SERIES STAINLESS STEEL SLOTTED SHIM-5" X 5"-1-5/8" SLOT
SLOTTED SHIM IS DESIGNED TO REDUCE PHYSICAL DISTURBANCES. THIS ITEM IS CONSTRUCTED FROM 300 SERIES STAINLESS STEEL. THE SLOTTED SHIM IS 5" WIDE AND 5" LONG. COMES IN SIZE D AND HAS A SLOT SIZE OF 1-5/8" INCLUDES THE FOLLOWING 20 EACH OF SIZE D SHIMS IN FOLLOWING THICKNESS: 0.001",0.002", 0.003", 0.004", 0.005", 0.010", 0.015", 0.020", 0.025", 0.050", 0.075", 0.100", 0.125"
PRC42930>
3/16" X 5-1/2" TURNBUCKLE-NTL221846 >
Crescent introduces the revolutionary, unstoppable VORTEX™ Bit Holder. The VORTEX Bit Holder (TM) features an exclusive Dual Impact Torsion Zone (TM) that absorbs shock, which prevents stripping screws and extends bit life. Compatible with 1/4" hex shank impact drivers and drills, the Crescent Vortex Bit Holder withstands heavy use in impact applications and prevents over-torquing of fasteners. Extend your performance and productivity today with the new VORTEX™ bit holder.
