Barrier & Safety Fences
84" STEEL FENCE/BARB WIRE POST-JWH718815>
Recently Viewed
HPG-2212-DPB COILHOSE PNEUMATICS Pressure Range: 20 to 120 PSI (calibrated for heavy-duty or standard service use).Chuck Type: Dual-foot design, allowing you to easily reach inner dual wheel valves on trucks and trailers.Body Style: Slim, compact pocket-
Pressure Range: 20 to 120 PSI (calibrated for heavy-duty or standard service use). Chuck Type: Dual-foot design, allowing you to easily reach inner dual wheel valves on trucks and trailers. Body Style: Slim, compact pocket-pencil profile with a pocket clip. Suffix Meaning: The "DPB" typically denotes the specific commercial packaging, such as a display pack or bulk pack configuration for retail and industrial supply distributors.
MilwaukeeĀ® Hole Dozerā¢ hole saw features Rip Guardā¢, the strongest tooth form in the industry, backed by the Rip Guardā¢ limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guardā¢ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the job site as well as continued hole quality. The Hole Dozerā¢ includes Plug Jackā¢, an all access slot design that allows for full access during plug removal. The Plug Jackā¢ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jackā¢ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change outs, use MilwaukeeĀ® universal quick-change arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
1-OZ " GOO-GONE" CLEANER--CARDED-JWH617512 >
United Abrasives-SAIT 95066 Backing Pad, 6 in Dia Pad, PSA Attachment
AlemiteĀ® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Smith BearingĀ® CR-1/2-B CR-B Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 0.19 in Dia x 5/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
