TCP-4894241-K 41-watt Spiral
42-watt compact fluorescent lamp (CFL) that outputs 2,700 to 2,850 lumens of 4100K cool white light. It features a standard E26 medium screw base and acts as an energy-efficient replacement for traditional 150-watt incandescent bulbs.
Recently Viewed
TCP-4894241-K 41-watt Spiral
42-watt compact fluorescent lamp (CFL) that outputs 2,700 to 2,850 lumens of 4100K cool white light. It features a standard E26 medium screw base and acts as an energy-efficient replacement for traditional 150-watt incandescent bulbs.
Dichtomatik 67024982 O-Ring, 7.8 mm ID x 11.6 mm OD, FKM, 80 Shore A Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
BBI 221199 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 4-1/2 in L Shoulder, 1/2-13
BBI 221199 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 4-1/2 in L Shoulder, 1/2-13
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
Browning® 1296458 T45L Automatic Torque Limiter, 1-3/16 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Dichtomatik N70208 O-Ring, 208 Dash Number, 0.609 in ID x 0.887 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
