Black Light Bulbs
8" -18LB UV BLACK 1000 PER BAG-CTE818UV1000 >
8" -40LB UV BLACK 100 PER BAG-CTE840UV100 >
8" -40LB UV BLACK 1000 PER BAG-CTE840UV1000 >
8" -50LB UV BLACK 100 PER BAG-CTE850UV100 >
8" -50LB UV BLACK 1000 PER BAG-CTE850UV1000 >
AUTOMOTIVE BULBS-BUL904 >
BULB SAME AS 6VC58 12.8V SA.DC
13.5 VOLT .69 AMP SC BAY BASE BULB
15-WATT 8-V MINIATURE BULBS-BULEL38>
15-1/2" BLACK WIRE TIES--PK/100-GVIGWT1550UVC >
21" 175# BLACK CABLE TIES--PK/25-GVIGWT2100SHDUV25 >
32" 175# BLACK CABLE TIES--PK/50-GVIGWT3200SHDUVB >
4" 18# BLACK CABLE TIES--PK/100-GVIGWT400UVC >
6" BLACK WIRE TIES--PK/100-GVIGWT600UVC >
8" 50# BLACK CABLE TIES--PK/100-GVIGWT800UVC >
12" BLACK M/D CABLE TIES--PK/500-GVIGWTD1200UV >
18" 120# BLACK CABLE TIES-CTEL18120BLK>
AUTOMOTIVE BULBS
AUTOMOTIVE BULBS
Recently Viewed
21 TOOTH DOUBLE SINGLE SPROCKETS FOR #80 CHAIN-BRWDS80A21 >
Apex® 49-B-TX-20-H Insert Tamper-Resistant Screwdriver Bit, T-20-H Torx® Point, 3.5 in OAL
Apex® 49-B-TX-20-H Insert Tamper-Resistant Screwdriver Bit, T-20-H Torx® Point, 3.5 in OAL
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
WIRE USED FOR COMMERCIAL AND INDUSTRIAL INSTALLATIONS. IT CAN BE USED IN WET OR DRY LOCATIONS. USED IN CONDUIT, CABLE TRAYS, BRANCH CIRCUITS, AND APPLIANCE WIRING.
- ALE4BARESOLID >
3/4" Shaft Dia
1.437" Seat OD
Head Type A
Seat Type 1
Buna Pump Seal
John Guest® Speedfit® PSEISV20P Shut-off Valve, 1/2 in, CTS x NPT, Polypropylene Body
The JG CTS Shut-off valve ensures an immediate water supply cut-off with a simple turn of the valve handle. The valve is designed to work with both copper and Speedfit plastic pipe. To lock the pipe in place, simply push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
