F-32-T-8/TL-835 32-watt 48 T8" Truetone Fluorescent Bulb
48"-LONG 1"-DIAMETER (T-8) 32-WATT
TWO PINS ON EACH END
Recently Viewed
F-32-T-8/TL-835 32-watt 48 T8" Truetone Fluorescent Bulb
48"-LONG 1"-DIAMETER (T-8) 32-WATT
TWO PINS ON EACH END
BBI 392100 Fender Washer, 5/16 in, 0.355 to 0.34 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
BBI 392100 Fender Washer, 5/16 in, 0.355 to 0.34 in ID x 1-1/2 in OD, 0.05 in THK, Stainless Steel
MAK-A-KEY 701818-305 Metric Undersized Key Stock, 305 mm L x 18 mm W x 18 mm H, 300 Stainless Steel
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
MORSE® 22733 1701 Bridge Reamer, 1-3/16 in Dia x 12 in L, #3 Morse Taper Shank, Left Spiral Flute
MORSE® 22733 1701 Bridge Reamer, 1-3/16 in Dia x 12 in L, #3 Morse Taper Shank, Left Hand Spiral Flute
NACHI 7314B Angular Contact Ball Bearing, 70 mm Dia Bore, 150 mm OD, 1 Row, 35 mm W, 40 deg, 118000 N Dynamic/88500 N Static Load
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications.
12/24-V SELF ADJUST BACKUP ALARMS-NASBA2A>
