FC12341GAL MIDLAB INC
1-GAL MULTI-SPEED SPRAY BUFF-ML-FC12341GAL >
Recently Viewed
1-GAL MULTI-SPEED SPRAY BUFF-ML-FC12341GAL >
3/4" STAUFF PIPE CLAMP - CFPSPAL4267SPPDPAL>
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
Browning® 1077452 QD Bushing, 2-9/16 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Weiler® 07772 Threaded Arbor Adapter, M10 x 1.5 Dia Inside x 5/8-11 Dia Outside
Dodge® 023009 115 Type E-Xtra Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.88 to 7.13 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.88 in OAL 4-1/2 in OAH
Dodge® 023009 115 Type E-Xtra Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.88 to 7.13 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.88 in OAL x 4-1/2 in OAH
