Magnolia Brush 4636 Non-Sparking Floor and Driveway Squeegee With 4100 Steel Bracket Handle, 36 in W, Rubber Blade, Curved Blade Shape, 60 in L Handle
Magnolia Brush 4636 Non-Sparking Floor and Driveway Squeegee With 4100 Steel Bracket Handle, 36 in W, Rubber Blade, Curved Blade Shape, 60 in L Handle
-
BrandMagnolia Brush
-
Manufacturer Part Number4636
-
CountryUSA
-
Frame MaterialAluminum
-
ColorBlack
-
TypeNon-Sparking
-
Handle Length60 in
-
Handle MaterialLacquered Wood
-
Width36 in
-
Blade MaterialRubber
-
Blade ShapeCurved
- Squeegee frame is made of 1 in angle aluminum
- Thick, high-grade blade is attached with ultra-reliable, cadmium plated screws
-
UNSPSC47121803
-
Package Description6/CT
Recently Viewed
Magnolia Brush 4636 Non-Sparking Floor and Driveway Squeegee With 4100 Steel Bracket Handle, 36 in W, Rubber Blade, Curved Blade Shape, 60 in L Handle
Magnolia Brush 4636 Non-Sparking Floor and Driveway Squeegee With 4100 Steel Bracket Handle, 36 in W, Rubber Blade, Curved Blade Shape, 60 in L Handle
Reed 03530 Replacement Cutter Wheel, 0.635 in Blade Exposure, For Use With LCRC8, LCRC12, LCRC16, RC20, RC24, RC30, RC36 and RC42S Rotary™ Cutter
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
Klein® 79208 Hex Key, T-Handle Handle, Steel
1/2" X 10" IMPACT SOCKET EXTENSION-PROJ718300>
BROWN TOGGLE FRAMED 3-WAY AC QUIET SWITCH, 15 AMP, 120V, RESIDENTIAL GRADE, NON-GROUNDING, QUICK WIRE PUSH-IN & SIDE WIRED. 527264-LEV14512 >
Weiler® 10027 Stem Mount End Brush, 1-1/8 in Dia Brush, Knot, 0.014 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Weiler® 10027 Stem Mount End Brush, 1-1/8 in Dia Brush, Knot, 0.014 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
