FORTUNE TRASH CAN LINERS FORBR-64-GR
55-GALLON 36X58 TRASHCAN LINERS--BOX OF 200
Recently Viewed
55-GALLON 36X58 TRASHCAN LINERS--BOX OF 200
Proto® J2146 Aligning Pry Bar, Angled/Chisel Tip, 28 in OAL, High Alloy Steel
Proto® J2146 Aligning Pry Bar, Curved/Offset Chisel Tip, 28 in OAL, High Alloy Steel
Irwin® 49907 I-100 Full Length Auger Bit, 7/16 in Dia, 7-1/2 in OAL, 4-1/2 in L Spiral Flute, 7/32 in Shank
Take on soft and hard wood with the 7/16 in. Solid Center Auger with Cutting Spur designed with a coarse screw-point for faster drilling. Get increased durability and smooth, straight drilling with the solid-center design. It has a strengthened twist for bend resistance in demanding applications, while the single cutting spur scribes the outside of the hole for faster drilling, clean holes, and an overall smoother finish.
MORSE® 91408 1330G General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, TiN Coated
MORSE® 91408 1330G General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, TiN Coated
MORSE® 12886 1333 General Purpose Jobber Length Drill Bit, 16 mm Drill - Metric, 0.6299 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 12886 1333 General Purpose Jobber Length Drill Bit, 16 mm Drill - Metric, 0.6299 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Milwaukee® 48-13-6250 Heavy Duty Solid Center Ship Auger Bit, 1-1/4 in Dia, 18 in OAL, 15 in L Spiral Flute, 7/16 in Shank
The Milwaukee® 1-1/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
