Air Freshener Dispensers
TimeMist® TMS 1047717 Classic Metered Air Freshener Dispenser, 6.6 oz, 3-1/2 in OAL, Top Hinge/Wall Mount, Plastic
TimeMist® TMS 1047717 Classic Metered Air Freshener Dispenser, 6.6 oz, 3-1/2 in OAL, Top Hinge/Wall Mount, Plastic
PINE TREE AIR FRESHENER-JWH579866 >
BABY POWDER KLEENMIST SPRAY-CON1184 >
Recently Viewed
BBI 500080 Full Thread Tap Bolt, 5/16-18, 4-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500080 Full Thread Tap Bolt, 5/16-18, 4-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
The Crescent End Cutting Nipper Pliers are made from drop-forged alloy steel and individually tested for strength and cutting ability. Each cutting edge is electronically induction-hardened and honed to a fine blade. Each plier also has a polished head and cushion grip handles. These pliers are ideal for general purpose cutting by both trades professionals and DIY users.
BBI 500074 Full Thread Tap Bolt, 5/16-18, 3-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500074 Full Thread Tap Bolt, 5/16-18, 3-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
Weller® 7135N Standard Soldering Tip With Hex Nut, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
Weller® 7135N Standard Soldering Tip With Hex Nut, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
Browning® 1045996 VP Series Type 5 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.35 in OD, 2 Grooves, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 1-3/8 to 2-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
MAK-A-KEY 701409-305 Metric Undersized Key Stock, 305 mm L x 14 mm W x 9 mm H, 300 Stainless Steel
A stock of material that is one foot or greater in length, and from which shaft keys are made. We manufacture keystock to suit every application need you have, in every size, grade and tolerance imaginable. Available in stocked standard sizes or custom made to your specifications.
