627290 DO-IT-BEST/HWI PRODUCTS
7" HANDHELD ALUMINUM SCOOP-JWH627290 >
Recently Viewed
7" HANDHELD ALUMINUM SCOOP-JWH627290 >
Rust-Oleum® 286507 Heavy Duty High Heat Coating, 1 gal Container, Liquid Form, Aluminum, 450 to 606 sq-ft/gal Coverage
Alkyd High Heat Coatings offer three levels of heat protection and will withstand continuous exposure to the temperatures in their posted range. General Purpose is designed for surfaces exposed to temperatures up to 400 deg F. Heavy Duty is designed for surfaces exposed to temperatures up to 800 deg F. High-Performance offers the highest level of heat protection for surfaces exposed to temperatures up to 1200 deg F. These products are self-priming can be applied directly to metal and prepared previously coated surfaces.
Dichtomatik N70443 O-Ring, 443 Dash Number, 7.475 in ID x 8.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dixon® FM1015F Reducing Hex Nipple, 1 x 1-1/2 in Nominal, Brass, FNPT x Male NH NST End Style, Domestic
Dixon® FM1015F Reducing Hex Nipple, 1 x 1-1/2 in Nominal, Brass, FNPT x Male NH NST End Style, Domestic
BBI 451005 Partially Threaded Cap Screw, 1-1/8-7, 4-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451005 Partially Threaded Cap Screw, 1-1/8-7, 4-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
Dichtomatik N70360 O-Ring, 360 Dash Number, 5.85 in ID x 6.27 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
