Performance Tool™ W1651 Hydraulic Multi-Power Set, 20000 lb Load Capacity
Performance Tool™ W1651 Hydraulic Multi-Power Set, 20000 lb Load Capacity
-
BrandPerformance Tool™
-
UPC039564125164
-
Manufacturer Part NumberW1651
-
CountryUSA
-
Specifications20000 lb Load Capacity
-
UNSPSC27121602
-
IncludesHydraulic Hand Pump, Jack Hose, 10 ton Ram, Spreader Ram, Extension Tubes, Male Connector, Flat Base, 90 deg V Base, Wedge Head, Spreader Plunger Toe, Spreader Ram Toe, Flex Head, Serrated Saddle and Heavy Duty Storage Case
-
Package Description1/PK
-
Owners/User Manual
Recently Viewed
Performance Tool™ W1651 Hydraulic Multi-Power Set, 20000 lb Load Capacity
Performance Tool™ W1651 Hydraulic Multi-Power Set, 20000 lb Load Capacity
1/2" GALV/FLOOR FLANGES-JPW1/2GFF>
Browning® 3546991 TGC Cam Detent Mini Straight Bushing Overload Clutch, 1/2 in Dia Bore, 3.15 in OD, 23 to 56 in-lb Torque, 2.36 in OAL
The Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore, the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350 to 1800 rpm.
Browning® 187811 TP50M Ball Detent Overload Clutch, 1-7/16 in Dia Bore, 6-1/4 in OD, 1200 to 3600 in-lb Torque, 3.19 in OAL
The Browning® Torq/Pro® overload clutch is a release type ball detent style torque overload device with a single position reset configuration. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Inherent in the design is accuracy, reversibility, a torque setting scale and a switch detector plate. An asymmetrical ball detent pocket pattern allows engagement in only one position. Torque capacity up to 63300 in-lb and speed ranges up to 1200 rpm.
INS-SC-104 Dodge® 123339 207 Normal Duty Set Screw Ball Bearing, 1-1/4 in Dia Bore, 2.8346 in OD, 1.71 in W, 5759 lb Dynamic/3461 lb Static Load
INS-SC-104 Dodge® 123339 207 Normal Duty Set Screw Ball Bearing, 1-1/4 in Dia Bore, 2.8346 in OD, 1.71 in W, 5759 lb Dynamic/3461 lb Static Load
6 BUTT WELD BLIND FLANGES
