Heat Exchangers
125/170000-BTU HEATER SPARK PLUG-DYGSPKFA1009 >
210000-BTU HEATER ROTOR KIT-DYGSPKFA1022 >
210000-BTU HEATER SPARK PLUG-DYGSPKFA1021 >
70000-BTU HEATER SPARK PLUG-DYGSPKFA1008 >
HEATER FILTER KIT - DYGSPKFA1005 >
170000-BTU HEATER ROTOR KIT-DYGSPKFA1000 >
1/2" TO 1.5" PVC HEATING BLANKETS-GRN86011/2>
842605 DO-IT-BEST/MANCHESTER TANK AND EQUIPMENT 20 LB. CAPACITY STEEL DOT VERTICAL LP PROPANE TANK
DURABLE STEEL DOT VERTICAL LP GAS CYLINDER. PERFECT FOR TEMPORARY HEATING, PORTABLE COOKING, FUELING PROPANE APPLIANCES, AND OTHER OUTDOOR APPLICATIONS. COMES EQUIPPED WITH AN OPD VALVE. CYLINDER IS SHIPPED EMPTY. FOR OUTDOOR USE ONLY.
- JWH842605>
HAND WARMERS--PAIR - JWH816111 >
SMALL/MED FOOT INSOLE WARMERS--PAIR - JWH805338>
AIR-ACTIVATED, KEEPS HANDS AND BODY WARM FOR UP TO 12 HOURS. SAFE, NATURAL HEAT IS ENVIRONMENTALLY FRIENDLY AND ODORLESS
- JWH803901 >
POND/STOCK TANK IMMERSING HEATERS-JWH757276>
STOCK TANK DE-ICER DRAIN PLUG-JWH742244>
PW-77 KEROSENE HEATER WICK-JWH496944>
WALL-TO-FLOOR HEATER LEGS-JWH460826>
KEROSENE HEATER WICK-JWH456462 >
GAS WALL HEATER BLOWER MOTOR-JWH454133>
PW72 KEROSENE HEATER WICK-JWH449032 >
PW-27 KEROSENE HEATER WICK-JWH449024 >
NG DIRECT VENT 18K BTU WALL HEATER-JWH437398 >
24-VOLT HEAT ONLY THERMOSTAT-JWH436512 >
1-PT SOOT REMOVER KEROSENE ADDITIVE-JWH430723>
16" OZ SOOT REMOVER IMPROVES HEATING EFFICIENCY BY OXIDIZING AND REMOVING SOOT BUILD UP IN CHIMNEYS AND FLUES-JWH430705 >
PW-10 KEROSENE HEATER IGNITER-JWH429842 >
Recently Viewed
DeWALT® DWAF3PH2IR5 Screwdriver Bit, #2 Point Phillips® Point, 3.5 in OAL
GP® CH105 Chisel, Flat, 3/4 in Tip, 18 in OAL
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
GearWrench® 86950 Combination Wrench, 13/16 in Wrench, 12 Points, 15 deg Offset, 12 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
Milwaukee® 48-62-2030 Flat Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 1 in W Blade, 18 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
#12 Stainless Steel Flatwashers
