HVAC Conduit Fittings
3/4" LIQUIDTITE CONDUIT--RL/???-JWH515846>
NON-METAL LIQUIDTITE CONDUIT (FT)-KAF3/8NM >
3/8" LIQUIDTITE CONDUIT (FT)-KAF3/8 >
3/4" NON-METAL LIQUIDTITE CONDUIT-KAF3/4NM >
3/4" LIQUIDTITE CONDUIT (FT)-KAF3/4 >
3" LIQUIDTITE ELECTRICAL CONDUIT-KAF3 >
2-1/2" LIQUIDTITE CONDUIT-KAF21/2 >
1/2" NON-METAL LIQUIDTITE CONDUIT-KAF1/2NM >
1/2" LIQUIDTITE CONDUIT (FT)-KAF1/2 >
1-1/4" LIQUIDTITE ELECTRICAL CONDUIT-KAF11/4 >
1.5" NON-METALLIC LIQUIDTITE CONDUIT-KAF11/2NM >
1-1/2" LIQUIDTITE ELECTRICAL CONDUIT-KAF11/2 >
Recently Viewed
3/16" X 2-3/4" TAPCON SCREW-JWH718777>
RIDGID® 92802 Plunger Knob, For Use With: Model 816/817 Semi-Automatic Die Head
RIDGID® 92802 Plunger Knob, For Use With: Model 816/817 Semi-Automatic Die Head
Apex® 49-B-TX-25 Power Drive Bit, T25 Torx® Point, 3-1/2 in OAL, Steel
Apex® 480-TX-45X Insert Bit, T45 Torx® Point, 1-1/4 in OAL, Steel
Browning® 1296532 T55L Automatic Torque Limiter, 1-7/16 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
United Abrasives-SAIT 52892 Close Coated General Purpose Premium Abrasive Disc With Grinding Aid, 4-1/2 in Dia, 7/8 in Center Hole, 60 Grit, 3A Aluminum Oxide Abrasive
United Abrasives-SAIT 52892 Close Coated General Purpose Premium Abrasive Disc With Grinding Aid, 4-1/2 in Dia, 7/8 in Center Hole, 60 Grit, 3A Aluminum Oxide Abrasive
