T-760-AA-400 4" Lightweight Dry Powder Hose(ft)
4" LIGHTWEIGHT DRY POWDER HOSE(FT)-RBHT760AA400 >
Recently Viewed
4" LIGHTWEIGHT DRY POWDER HOSE(FT)-RBHT760AA400 >
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. The Gardner Bender 4 oz. White liquid electrical tape is a liquid coating that is used to insulate and protect electrical splices and connections. The waterproof formula resists damage caused by chemicals and UV rays. Fast drying formula.
Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD
ECC-EZ-205 Dodge® 128961 Metal Detectable Snap On Closed End Cover, 2-11/64 in OD, 3-1/16 in W, High-Density Polyethylene (HDPE) Housing, Blue
All Dodge® E-Z-Kleen® and Ultra Kleen™ bearings include a housing groove to accept a snap-on polymer end cover. These durable covers are easy to install and each is provided with a drain hole to prevent moisture from collecting inside the cover. The snap-on style of end cover incorporates an additional lip on the mounting surface for a rigid fit within the housing. This tight fit creates a better seal prevents movement of the cover during operation and high pressure cleaning. Dodge® snap-on end covers provide positive sealing in wet environments and create safer working conditions by enclosing rotating shafts.
