337317 DO-IT-BEST/HWI PRODUCTS
45" X 8" MAGNESIUM BULL FLOAT-JWH337317 >
Recently Viewed
45" X 8" MAGNESIUM BULL FLOAT-JWH337317 >
Sharkbite® U870W100 Tubing, 3/4 in Nominal, 0.671 in ID x 7/8 in OD x 100 ft Coil L x 0.097 in THK Wall, White, PEX, Domestic
SharkBite PEX tubing is cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. PEX Pipe is durable, flexible and corrosion resistant. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red). A repeating SharkBite imprint patterns provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-to-Connect Fitting. This feature only works if the tubing is cut between the SharkBite imprint patterns. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems.
Koyo IR-88 Inch Series Regular Width Inner Ring, 1/2 in ID x 3/4 in OD, 0.515 in OAW, For Use With B-126, B-128, J-126, J-128, M-1261, M-1281 Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
BBI 486344 Lag Screw, 3/8 in, 3 in OAL, Low Carbon Steel, Zinc Blue
Gates® Power Transmission PowerGrip® Twin Power® TP660L100 Light Timing Belt, 1 in W, 66 in OAL, 3/8 in Pitch, 176 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
Pyramex® SS3365E Sport Style Safety Eyewear, Anti-Scratch, Ice Blue Mirror Lens, Silver, Nylon 6.6 Frame, Polycarbonate Lens, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
