15002 3/16" Stainless Steel Log Chain(ft)
3/16" STAINLESS STEEL LOG CHAIN(FT)-TCI15002 >
Recently Viewed
3/16" STAINLESS STEEL LOG CHAIN(FT)-TCI15002 >
48" X 24" MAPLE WORKBENCH TOPS-HLW6000W4824>
Crosby® 1043472 G-291 Eye Bolt With Regular Nut, 5/8 in, 4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043472 G-291 Eye Bolt With Regular Nut, 5/8 in, 4 in L Shank, Forged Steel, Hot Dipped Galvanized
BBI 644175 Partially Threaded Hex Bolt, M16x2, 90 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644175 Partially Threaded Hex Bolt, M16x2, 90 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
Sealmaster® 705590 Expansion Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger, 1-1/4 in Dia Bore, 3.14 in OD, 1-3/4 in W, 5782 lb Dynamic/3493 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Precision Brand® 16AF15 Shim Stock Assortment, 1008-1010 Full Hard Steel, 0.001 in THK Min, 0.031 in THK Max, 12 in L x 6 in W
6 x 12 in Assortment contains 1 each of the following thicknesses: 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.01 in, 0.012 in, 0.015 in, 0.02 in, 0.025 in and 0.031 in. Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
