Spring Hinges
National Hardware® N184-556 N184 V520 Spring Hinge, 30 lb, Cold Rolled Steel, Brass
National Hardware® N184-556 N184 V520 Spring Hinge, 30 lb, Cold Rolled Steel, Brass
2-3/4" X 1-7/8" BURNISHED BRASS SELF-CLOSING STEEL HINGE. SOLD IN PAIRS-JWH238317 >
3/8" INSET BURNISHED BRASS SELF-CLOSE HINGE. SOLD IN SET OF 2-JWH238308 >
4-1/2" STEEL BALL/BEARING HINGES--PK/3-JWH236888 >
SELF-CLOSING BRASS HINGES. 3/8" INSET FOR OVERLAPPING DOORS-JWH233367 >
CHROME SELF CLOSING HINGES **-JWH231421 >
V-520 4-1/2" SPRING HINGES-NTL226399 >
3/8" INSET CHROME SELF-CLOSE HINGES-JWH221940 >
3/8" BRASS SELF-CLOSING INSET HINGES-JWH215984 >
BRASS SELF-CLOSING STEEL HINGES-JWH213780 >
POLISHED BRASS SELF-CLOSING HINGE. 3/8" INSET-JWH213502 >
BURNISHED BRASS SELF-CLOSING HINGE. 3/8" INSET-JWH213496 >
ANTIQUE BRASS SELF-CLOSING HINGE - JWH207632 >
3/8" SELF-CLOSING INSET HINGES - JWH202991 >
2-3/4" SELF-CLOSING HINGE - JWH202983 >
4" DOOR HINGES-NTL195693>
V-520 4" SPRING HINGES-NTL184572 >
V-127 3" BRASS DBL SPRING HINGES-NTL115303 >
3" FULL SURFACE SPRING HINGE--CARD OF 2-NTL115055 >
3" FULL SURFACE SPRING HINGES-NTL115006 >
3" FULL SURFACE SPRING HINGE--CARD OF 2-NTL114785 >
Recently Viewed
2-3/8" 12-PT 3/4"-DR IMPACT SOCKET-GRY3176R>
13/16" 4-PT 3/4" -DRIVE IMPACT SOCKET-GRY3313SHD >
RIDGID® 39690 Coil Spring, For Use With: Model 141/161 Pipe and Conduit Geared Threader
RIDGID® 39690 Coil Spring, For Use With: Model 141/161 Pipe and Conduit Geared Threader
Gateway Safety® Venom® 675 Replacement Faceshield Visor, Clear, Polycarbonate, 9 in H x 15-1/2 in W x 1/16 in THK Visor, For Use With 677 Head Gear and 682 Cap Adapter, ANSI Z87.1, CSA Z94.3, cULus Listed
Gateway Safety® Venom® 675 Replacement Faceshield Visor, Clear, Polycarbonate, 9 in H x 15-1/2 in W x 1/16 in THK Visor, For Use With 677 Head Gear and 682 Cap Adapter, ANSI Z87.1, CSA Z94.3, cULus Listed
MCR Safety 494700 Double Matrix Replacement Faceshield Window, Clear, Polycarbonate, 7 in H x 16-3/4 in W x 0.4 in THK Visor, For Use With Double Matrix Faceshields, ANSI Z87.1, CSA Z94.3
Double Matrix Replacement Window Clear PETG Face Shield Measures 7 x 16.75 Inches .042 in Thickness Protects from splash and impact, CAN / CSA Z94.3 compliant MCR Safety's headgear and face shields offer superior protection from liquid splashes and flying debris that would otherwise be damaging to the face. An assortment of brackets and face shield sizes and materials make it a good bet that you can find an option just right for you. The 494800CSA is a flat PETG replacement face shield for our 483000 Double Matrix headgear. It measures 7 x 16.75 inches and is .042 in thickness. This product meets the ANSI/ISEA Z87.1-2025 standard.
MSA V-Gard® 10115844 Anti-Fog Anti-Scratch Heavy Duty Molded Visor, Clear, Polycarbonate, 9-1/4 in H x 17 in W x 0.098 in THK Visor, For Use With MSA V-Gard® Frames and Headgears, ANSI/ISEA Z87.1-2010, CSA Z94.3, EN 166, AS/NZS 1337
MSA molded polycarbonate visors offer superior protection from flying debris, splash, UV radiation and molten metal. Being molded makes them optically correct, and helps ensure clear vision and reduced eye fatigue. The anti-fog and anti-scratch coatings increase comfort and improve wear.
