Crosby® 1032938 HG-228-1 1/2 X 12 Turnbuckle, Jaw/Jaw, 1-1/2 in Thread, 21400 lb Working, 12 in Take Up, 33.68 in L Close, Steel
Crosby® 1032938 HG-228 Turnbuckle, Jaw/Jaw, 1-1/2 in Thread, 21400 lb Working, 12 in Take Up, 33.68 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1032938
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1-1/2 in
-
MaterialSteel
-
Closed Length33.68 in
-
SeriesHG-228
-
Working Load21400 lb
-
End/EndJaw/Jaw
-
Take Up12 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 7|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1032938 HG-228-1 1/2 X 12 Turnbuckle, Jaw/Jaw, 1-1/2 in Thread, 21400 lb Working, 12 in Take Up, 33.68 in L Close, Steel
Crosby® 1032938 HG-228 Turnbuckle, Jaw/Jaw, 1-1/2 in Thread, 21400 lb Working, 12 in Take Up, 33.68 in L Close, Steel
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
BBI 489145 Fully Threaded Carriage Bolt, 5/8-11, 4-1/2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489145 Fully Threaded Carriage Bolt, 5/8-11, 4-1/2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
EATON DG222NGB DG Series Cartridge Fusible General Duty Safety Switch, 240 V AC, 60 A, 3 to 10 hp, 7-1/2 to 15 hp, 2 Poles
General duty safety switches are used in residential and commercial applications. They are suitable for light duty motor circuits and service entrance applications. Fusible (plug or cartidge) and non-fusible switches are available.
Magnolia Brush 1024 General Purpose Floor Broom With M-60 Handle, 3 in L Trim, Black Tampico Bristle
Magnolia Brush 1024 General Purpose Floor Broom With M-60 Handle, 3 in L Trim, Black Tampico Bristle
Morse® AT16 Hole Saw, 1 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
