Crosby® 1030137 HG-223 Turnbuckle, Hook/Hook, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16-1/2 in L Close, Steel
Crosby® 1030137 HG-223 Turnbuckle, Hook/Hook, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16-1/2 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1030137
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter5/8 in
-
MaterialSteel
-
Closed Length16-1/2 in
-
SeriesHG-223
-
Working Load2250 lb
-
End/EndHook/Hook
-
Take Up6 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 5|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1030137 HG-223 Turnbuckle, Hook/Hook, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16-1/2 in L Close, Steel
Crosby® 1030137 HG-223 Turnbuckle, Hook/Hook, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16-1/2 in L Close, Steel
Milwaukee® 2323-21 M12™ M-Spector™ Inspection Camera Kit, 0.394 in Dia, 4.3 in LCD Display, Black/Red
The MILWAUKEE® M12™ M-Spector™ 360 4' Inspection Camera Kit delivers clearer images for easier inspections. The 4.3” LCD screen with 720p camera provides crisp, clear images. The 10mm camera head allows for easy access while the cable balances flexibility and rigidity for both drain line and behind wall inspections. Conveniently share photos and videos via SD card. The M-Spector™ 360 features 360° image rotation for easy adjustment by physically rotating the screen or with a push of a button. Quickly focus on points of interest with 3 levels of zoom. This plumbing inspection camera also includes a 5-mode brightness adjustment to change the LED output.
Browning® 1228865 Finished Bore Straight Miter Gear With Hardened Teeth, Keyway and Setscrew, 1 in Dia Bore
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
CRIMPED 3/4" X .014 X 1/4"-SHANK WIRE END BRUSH - SAI02702 >
