Crosby® 1030235 HG-223 Turnbuckle, Hook/Hook, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.8 in L Close, Steel
Crosby® 1030235 HG-223 Turnbuckle, Hook/Hook, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.8 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1030235
-
CountryUSA
-
FinishHot Galvanized
-
Thread Diameter3/4 in
-
MaterialSteel
-
Closed Length24.8 in
-
SeriesHG-223
-
Working Load3000 lb
-
End/EndHook/Hook
-
Take Up12 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigue properties
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Fatigue rated
-
UNSPSC31162405
-
Standards/ApprovalsFF-T-791b|Type 1 Form 1 - Class 5|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1030235 HG-223 Turnbuckle, Hook/Hook, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.8 in L Close, Steel
Crosby® 1030235 HG-223 Turnbuckle, Hook/Hook, 3/4 in Thread, 3000 lb Working, 12 in Take Up, 24.8 in L Close, Steel
#14 X 2-1/2" Flat Head Slotted Wood Screw
BBI 451122 Partially Threaded Cap Screw, 1/2-13, 15 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451122 Partially Threaded Cap Screw, 1/2-13, 15 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451144 Partially Threaded Cap Screw, 3/4-10, 8-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451144 Partially Threaded Cap Screw, 3/4-10, 8-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451105 Partially Threaded Cap Screw, 1/2-13, 8-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451105 Partially Threaded Cap Screw, 1/2-13, 8-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
Dichtomatik N70324 O-Ring, 324 Dash Number, 1.35 in ID x 1.77 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
