Crosby® 1031519 HG-226 Turnbuckle, Eye/Eye, 7/8 in Thread, 7200 lb Working, 12 in Take Up, 26.2 in L Close, Steel
Crosby® 1031519 HG-226 Turnbuckle, Eye/Eye, 7/8 in Thread, 7200 lb Working, 12 in Take Up, 26.2 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1031519
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter7/8 in
-
MaterialSteel
-
Closed Length26.2 in
-
SeriesHG-226
-
Working Load7200 lb
-
End/EndEye/Eye
-
Take Up12 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b/Type 1/Form 1/Class 4|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1031519 HG-226 Turnbuckle, Eye/Eye, 7/8 in Thread, 7200 lb Working, 12 in Take Up, 26.2 in L Close, Steel
Crosby® 1031519 HG-226 Turnbuckle, Eye/Eye, 7/8 in Thread, 7200 lb Working, 12 in Take Up, 26.2 in L Close, Steel
BBI 451087 Fully Threaded Cap Screw, 1-1/2-12, 4 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451087 Fully Threaded Cap Screw, 1-1/2-12, 4 in L Under Head, 8 Grade, Alloy Steel, Plain
Dichtomatik N70226 O-Ring, 226 Dash Number, 1.984 in ID x 2.262 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
WATER HEATER PRESSURE RELIEF VALVE FOR WATER HEATERS UP TO 15,000 BTU'S. EXTENSION THERMOSTAT I THE HOT OUTLET LINE. MALE INLET AND FEMALE OUTLET 1/2"-JWH412404 >
WATER HEATER ADAPTER FITTING-JWH436914 >
4"-FPT X 2"-FPT BLACK REDUCER - JPW4X2BR >
