Crosby® 1031270 HG-226-5/16 X 4-1/2 Turnbuckle, Eye/Eye, 5/16 in Thread, 800 lb Working, 4-1/2 in Take Up, 9.98 in L Close, Steel
Crosby® 1031270 HG-226 Turnbuckle, Eye/Eye, 5/16 in Thread, 800 lb Working, 4-1/2 in Take Up, 9.98 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1031270
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter5/16 in
-
MaterialSteel
-
Closed Length9.98 in
-
SeriesHG-226
-
Working Load800 lb
-
End/EndEye/Eye
-
Take Up4-1/2 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b/Type 1/Form 1/Class 4|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1031270 HG-226-5/16 X 4-1/2 Turnbuckle, Eye/Eye, 5/16 in Thread, 800 lb Working, 4-1/2 in Take Up, 9.98 in L Close, Steel
Crosby® 1031270 HG-226 Turnbuckle, Eye/Eye, 5/16 in Thread, 800 lb Working, 4-1/2 in Take Up, 9.98 in L Close, Steel
BBI 400296 Fully Threaded Cap Screw, 1/2-13, 1-1/4 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400296 Fully Threaded Cap Screw, 1/2-13, 1-1/4 in L Under Head, A2 (18-8) Grade, Stainless Steel
IKO BA146ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 7/8 in Dia Bore, 1-1/8 in OD, 1 Row, 3/8 in W, 5430 N Dynamic/6740 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Gates® Power Transmission PowerGrip® 173L050 Light Timing Belt, 1/2 in W, 17-1/4 in OAL, 3/8 in Pitch, 46 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Milwaukee® 4096 Diamond Coring Motor With Clutch, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.
Klein® 64306 Heavy Duty Grizzly Bar, Angled/Claw Tip, 55-1/2 in OAL, Hardened Alloy
The strong, durable Klein Tools 55-1/2-Inch Grizzly Bar can help save you time and effort with a variety of jobs. The bar features a forged and hardened-alloy blade, a center keyhole nail-pulling slot and a V-notch in the tapered edge for convenient use.
