Crosby® 1031476 HG-226 Turnbuckle, Eye/Eye, 3/4 in Thread, 5200 lb Working, 12 in Take Up, 24.9 in L Close, Steel
Crosby® 1031476 HG-226 Turnbuckle, Eye/Eye, 3/4 in Thread, 5200 lb Working, 12 in Take Up, 24.9 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1031476
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter3/4 in
-
MaterialSteel
-
Closed Length24.9 in
-
SeriesHG-226
-
Working Load5200 lb
-
End/EndEye/Eye
-
Take Up12 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b/Type 1/Form 1/Class 4|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1031476 HG-226 Turnbuckle, Eye/Eye, 3/4 in Thread, 5200 lb Working, 12 in Take Up, 24.9 in L Close, Steel
Crosby® 1031476 HG-226 Turnbuckle, Eye/Eye, 3/4 in Thread, 5200 lb Working, 12 in Take Up, 24.9 in L Close, Steel
Dichtomatik N70013 O-Ring, 013 Dash Number, 0.426 in ID x 0.566 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
32" 175# NATURAL CABLE TIE--PK/25-GVIGWT3200SHDB >
Dichtomatik N70246 O-Ring, 246 Dash Number, 4.484 in ID x 4.762 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Crosby® 1031537 HG-226 Turnbuckle, Eye/Eye, 7/8 in Thread, 7200 lb Working, 18 in Take Up, 32.67 in L Close, Steel
Crosby® 1031537 HG-226 Turnbuckle, Eye/Eye, 7/8 in Thread, 7200 lb Working, 18 in Take Up, 32.67 in L Close, Steel
3" -FEMALE PIPE THREADX2" -FEMALE PIPE THREAD BLACK REDUCER-JPW3X2BR >
