HG-227-5/8X6 CROSBY 5/8"X6" JAW/EYE TURNBUCKLE
Each HG-227 turnbuckle comes with a jaw on one end and an eye on the other for compatibility with a variety of connection points.
The forged jaw ends are fitted with bolts and nuts (sizes 1/4" through 5/8") or pins and cotters (sizes 3/4" through 2-3/4"), ensuring secure connections and ease of assembly.
The eyes are forged and elongated, facilitating easy assembly and promoting more uniform stress distribution. For most of the turnbuckles (sizes 1/4"-2-1/2"), a shackle one size smaller can be reeved through the eye.
Recently Viewed
Each HG-227 turnbuckle comes with a jaw on one end and an eye on the other for compatibility with a variety of connection points.
The forged jaw ends are fitted with bolts and nuts (sizes 1/4" through 5/8") or pins and cotters (sizes 3/4" through 2-3/4"), ensuring secure connections and ease of assembly.
The eyes are forged and elongated, facilitating easy assembly and promoting more uniform stress distribution. For most of the turnbuckles (sizes 1/4"-2-1/2"), a shackle one size smaller can be reeved through the eye.
Get high torque, maximum speed and up to 2X the runtime of 18 V cordless drills. With 750 in-lb of torque and up to 1800 rpm, the M28â„¢ cordless Lithium-Ion 1/2 in hammer drill is ideal for drilling larger holes and driving larger screws faster. It's powered by the revolutionary M28â„¢ Lithium-Ion battery, which provides up to 2X more runtime than 18 V batteries this hammer drill features a 1/2 in all metal, single sleeve chuck with carbide jaws for maximum grip strength on bits in high torque applications. The non-slip, soft-grip handle reduces vibration for comfort and less fatigue during prolonged use. Use the drill's side handle to increase your leverage and control. The drill comes with 2 M28â„¢ batteries, an M28â„¢ Battery charger and a #2 Phillips bit.
150-AMP 600-V RECTIFIER FUSES-EDIE60C150 >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
1/2" X 12" JAW-JAW TURNBUCKLE. Crosby HG-228 Jaw & Jaw Turnbuckles. The Industry Standard in Rigging Hardware
CYLINDRICAL ROLLER BEARINGS-BCAMA1205>
