S-MD-R-500-400 1/2" X 4" Blue Md Rect
1/2" X 4" BLUE MD RECT DIE SPRINGS-LANSMDR500400 >
Recently Viewed
1/2" X 4" BLUE MD RECT DIE SPRINGS-LANSMDR500400 >
BBI 400040 Fully Threaded Cap Screw, 1/4-28, 3/4 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400040 Fully Threaded Cap Screw, 1/4-28, 3/4 in L Under Head, A2 (18-8) Grade, Stainless Steel
Brass shim is made from a half hard, cold rolled, 260 alloy brass. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where corrosion problems exist, low magnetic permeability. Excellent forming qualities and may be lightly drawn, blanked or stamped. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
3/4-10 T-SLOT NUT-PDTSG5041420 >
Browning® 1210558 Minimum Plain Bore Spur Gear, 20 Diametral Pitch, 14.5 deg, 3/8 in W Face, 16 Teeth, 0.8 in Dia Pitch, 3/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
