122-671 NATIONAL HARDWARE PRODUCTS
V-2124 6" SAFETY GATE HOOKS-NTL122671 >
Recently Viewed
V-2124 6" SAFETY GATE HOOKS-NTL122671 >
Littelfuse® POWR-GARD® KLSR030 Current Limiting High Speed North American Style Fast Acting Fuse, 30 A, 600 V AC/250 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
KLSR series RK1 fuses were the earliest type of current limiting fuse developed. Their single element, silver link design enables them to provide fast acting overload and short circuit protection. When used to protect inductive loads such as motors, solenoids and transformers, KLSR series fuses must be greatly oversized to prevent opening the fuses on harmless inrush currents. In such applications, KLSR series fuses may only provide short circuit protection.
Gates® Power Transmission MegaCrimp™ 12MB-12FPX90 G60 SAE to SAE Hydraulic Elbow Adapter, 1-1/16-12 x 3/4-14 Nominal, Male O-Ring Boss™ x Feamle NPSM Swivel, Steel, Import
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
Drillco 750A111 Spade Drill, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 2XD D Cutting, Solid Carbide
Solid Carbide spade drills perform well in hard to machine materials (up to Rc 60), high strength alloys, plastic, and glass. They can be used in thin sheet metal and spotting applications. Drilling depth should not exceed 2x the drill diameter.
Sealmaster® 700676 SRP Standard-Duty Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 2-7/8 to 4-3/8 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 4-3/4 in OAL x 2-13/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
RIDGID® 39645 Selector Knob, For Use With: Model 141 2-1/2, 3, 3-1/2, 4 in Pipe and Conduit Geared Threader and Model 161 4, 4-1/2, 5, 6 in Pipe and Conduit Geared Threader
RIDGID® 39645 Selector Knob, For Use With: Model 141 2-1/2, 3, 3-1/2, 4 in Pipe and Conduit Geared Threader and Model 161 4, 4-1/2, 5, 6 in Pipe and Conduit Geared Threader
