Master Locks #3 KEYED-ALIKE #3488 PADLOCKS MAS 3-KA-3488
#3 KEYED ALIKE #3488 PADLOCK - MAS3KA3488 >
Recently Viewed
#3 KEYED ALIKE #3488 PADLOCK - MAS3KA3488 >
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Dodge® 065296 215 Special Duty Type C Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 11.13 to 12.38 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 14-1/4 in OAL x 9.88 in OAH
Dodge® 065296 215 Special Duty Type C Pillow Block Roller Bearing Unit, 2-15/16 in Dia Bore, 11.13 to 12.38 in L Bolt Center-to-Center, 4-3/4 in Base to Bore Centerline, 14-1/4 in OAL x 9.88 in OAH
Krylon® Tough Coat® A00340 S003 Rust Control Solvent Based Spray Primer, 16 oz Container, Liquid Form, Gray, 20 sq-ft Coverage
6-32" USS Nylock Jam Nuts
DOUBLE-V V-BELTS-PIXBB73>
