Construction Blocks
BLOCK DIV. 12510 1"-ID TO 1-1/4"-OD STEEL BUSHINGS
12510 Bushing is a bronze/steel powdered metal component, oil impregnated for self-lubrication; 7/8″ wide x 1 1/4″ diameter x 1″ id; weight .15 lbs.
6-67228 CROSBY 4" STEEL BLK 1/2 MR TRIPLE SHEAVES
Block Size: 4 inches End Fitting: HS (Loose Side Hook with Latch) Rope Size: Designed for 5/8 inch diameter line Sheave Configuration: Single sheave featuring a bronze bushing for extended block life
4-61789 CROSBY 10" BRONZE BUSHING-STYLE SHEAVES
Model / Series: 10-2Nominal Outside Diameter: 9-7/8 inches Compatible Wire Rope Size: 1/2 inch Shaft (Bore) Size: 1-1/2 inches Rim Width: 1-3/4 inches Hub Width: 1-5/8 inches Nominal Hub Outside Diameter: 2-9/16 inches Nominal Tread Diameter: 8-5/16 inches Material: Forged Steel (F.S.) Approximate Weight: 14.50 lbs
302908 JET EQUIPMENT AND TOOLS
8" 3/4" -WIRE 4-T SNATCH BLOCK-JET302908 >
302905 JET EQUIPMENT AND TOOLS
5" 1/2" -WIRE 1-1/2-T SNATCH BLOCK-JET302905 >
223-370 NATIONAL HARDWARE PRODUCTS
1" SINGLE SWIVEL NIC PULLEY-NTL223370 >
195-818 NATIONAL HARDWARE PRODUCTS
#3213 2" FIXED SINGLE EYE PULLEY-NTL195818 >
195-800 NATIONAL HARDWARE PRODUCTS
#3213 1-1/2" SINGLE EYE PULLEY-NTL195800 >
195-784 NATIONAL HARDWARE PRODUCTS
#3211 1-1/2" STEEL SINGLE PULLEY-NTL195784 >
09-13042 CROSBY 6"-DIAMETER 1/2" WIRE ROPE SHEAVES
Nominal Outside Diameter: 6 inches Pattern Number: 1193Wire Line / Rope Size: 1/2 inch Shaft Size: 1 inch Hub Width: 1-1/16 inches Rim Width: 1 inch Material: Powder Metal (P.M.) Approximate Weight: 3.75 lbs
06-83031 CROSBY 4" DBL PULLEY 1/2" MR 302B GALV
Crosby part number 0683031 corresponds to a 4-inch Galvanized Double Pulley Block (Model 302B) designed for a 1/2-inch manila rope. This industrial lifting tool is manufactured by the Kito Crosby material handling group
06-083077 CROSBY 6" IRON BLOCK 3/4MR 302B GALV
DOUBLE PULLEY6" IRON BLOCK 3/4MR 302B GALV
05375 BLOCK DIVISION, INC.
5" SHEAVE, 7/8" X 5" X 5/16" X 1-1/4"-BLK05375 >
Recently Viewed
20-PC 3/4"-DR 12-PT MECHANICS SET-ARS15710>
11/16" 1/2"-DR DP SOCKET - ALL12263 >
Grey Pneumatic 8032 Socket Set 3/4" Dr 11Pc Truck Wheel Ser Im, Price/SET
15-MM 3/8"-DR UNIV SOCKET - ALL11565 >
Grey Pneumatic 1/2" X 6 Point Deep 1/2" Drive Universal Impact Socket
A set of seven (7) extra thin wall deep length impact sockets for removing/ installing transmission and differential end yoke locknuts on a wide variety of trucks.
You no longer need to modify an impact socket; or purchase expensive; custom designed hand sockets to service these parts. Because of the extra thin wall design; larger drive impact tools with reducing adapters should not be used with these impact sockets. *Use caution and follow the manufacturer's recommendations when servicing these parts.
Set Contains 7 Pieces, 3/4" Drive 7 Piece Truck Pinion Locknut Set.
This struck pinion locknut socket set contains the following sizes: 2", 2-1/8", 2-1/4", 2-3/8", 2-1/2", 2-5/8" and 2-3/4"
