Cable to Channel Clamps
The Crosby G-450 7/8" is a heavy-duty, drop-forged wire rope clip (part number 1010211) designed by The Crosby Group to clamp and secure 7/8-inch diameter wire ropes. It features a hot-dip galvanized coating to prevent rusting and is instantly recognizable on jobsites by its signature Red U-Bolt.
Minimum Number of Clips: A minimum of 3 clips must be applied to securely form a wire rope eye or termination loop. Torque Requirement: The nuts must be tightened evenly to a minimum torque of 95 ft-lbs to prevent cable slippage .Rope Turn-Back: You must allow for exactly 12 inches of cable turn-back from the base of the eye to ensure adequate length for clip placement. Efficiency Rating: Properly installed clips on 9/16" wire rope yield an 80% efficiency rating based on the catalog breaking strength of the wire rope.
Recently Viewed
HCI Preferred Supplier 944430 Lift In-Line Check Valve, 1/2 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944430 Lift In-Line Check Valve, 1/2 in Nominal, NPT End Style, Forged Brass Body
11-TOOTH #50-1 CHAIN SPROCKETS IDC 50-B-11-F-7/8
11 TOOTH SPROCKETS FOR #50 CHAIN
IKO PILLOBALL PHSB6LNF Inch Series Insert/Lubrication Type Rod End With Zerk Type Grease Nipple, 3/8 in Dia Bore, 1 in OD, 0.562 in W, 9230 N Dynamic/21600 N Static Load
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
Werner DeCoil lanyards feature the DCELL shock pack, a deceleration device designed for controlled tearing action to reduce fall arrest force. Unique wear indicating polyester webbing allows for easy inspection and provides durability that will last. The big head safety hook is designed to prevent false engagement.
Werner DeCoil lanyards feature the DCELL shock pack, a deceleration device designed for controlled tearing action to reduce fall arrest force. Unique wear indicating polyester webbing allows for easy inspection and provides durability that will last. The big head safety hook is designed to prevent false engagement.
United Abrasives-SAIT Saitlamâ„¢ 73340 Close High Performance Coated Abrasive Flap Disc, 4-1/2 in Dia, 7/8 in Center Hole, 40 Grit, Coarse Grade, 3A Aluminum Oxide Abrasive, Type 27 Flat Disc
