G-429-7/8 CROSBY 7/8" FIST GRIP WIRE CLAMPS
Entire clip is galvanized to resist corrosive and rusting action
Achieves 80% efficiency of published wire rope breaking strength
Bolts are an integral part of the saddle
Saddle is made from forged steel
Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation
Assembled with standard heavy hex nuts
Satisfies ASME B30.26 requirements
Recently Viewed
Entire clip is galvanized to resist corrosive and rusting action
Achieves 80% efficiency of published wire rope breaking strength
Bolts are an integral part of the saddle
Saddle is made from forged steel
Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation
Assembled with standard heavy hex nuts
Satisfies ASME B30.26 requirements
PE064-100K by Coilhose | Tubing | 3/8" OD x .250" ID | .062" Wall thickness | Black | Polyethylene | 100ft
TRAILER JACKS-VALVI720>
Dremel® 407 Sanding Drum, 1/2 in Dia x 1/2 in L, 1/8 in Dia Shank, 15000 rpm
United Abrasives-SAIT 71043 2A Premium Coated Flap Wheel, 2 in Dia, 1 in W Face, 180 Grit, Very Fine Grade, Aluminum Oxide Abrasive
The Crescent Nicholson single-cut, bastard-cut angled lathe files are ideal for filing down significant amounts of wood or soft metals from a lathe-turned object. The bastard-cut coarseness design removes material aggressively, cutting faster than a regular mill file, but leaves a smoother finish because of the single-cut pattern. The rectangular shape and large size of these files are perfect for large-scale jobs where precision is key.
