1" X 1" X 1/16" X 48" Aluminum Square FOR49253
1" X 1" X 1/16" X 48" ALUMINUM SQUARE TUBE Aluminum square tube stock is suitable for most light and medium duty projects. Can be welded using Forney or similar aluminum MIG wire, arc rod, or gas welding specialty rods.
Recently Viewed
1" X 1" X 1/16" X 48" ALUMINUM SQUARE TUBE Aluminum square tube stock is suitable for most light and medium duty projects. Can be welded using Forney or similar aluminum MIG wire, arc rod, or gas welding specialty rods.
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
F-24-T-12-D/HO 22"-long 20-watt Fluorescent Bulb
22"-LONG 20-WATT FLUORESCENT BULB - BULF24T12D/HO>
MORSE® 22182 1655 Chucking Reamer, 0.249 in Dia x 6 in OAL, 0.2405 in Dia Straight Shank, Straight Flute
GEARWRENCH® 68-524G Dead Blow Hammer, 13 in OAL, 1-1/2 in Dia Ball Peen Face, 1.4 lb Steel Head, Polyurethane Handle
We offer a broad line of polyurethane dead blow hammers in ball pein, standard one-piece, slim line one-piece, and sledge head one-piece types, all built with the strength and innovation that define GEARWRENCH. Each hammers' head contains a canister full of steel shot that creates a dead blow effect, sustaining impact, maximizing force, reducing rebound, and absorbing the shock of impact. The handles are reinforced with steel for strength and also feature a knurled texture for improved grip. The flanged back end of the handle won't slip past your grip. The ball pein type has a steel face and pein which allows for conventional use in striking punches and chisels, as well as shaping and straightening unhardened metals. The standard, slim line, and sledge head one-piece types have a durable, hot-cast polyurethane coating which resists chipping or splitting, and is non-marring and non-sparking. The hot-cast polyurethane coating also reduces noise when striking metal.
