1-SQX24 1" X 288 11-ga Square
1" X 288 11-GA SQUARE TUBE-JMS1SQX24 >
Recently Viewed
1" X 288 11-GA SQUARE TUBE-JMS1SQX24 >
FLAP WHEEL 1/4" SHANK MOUNTED, FEATURING DURABLE, HIGH-GRADE ALUMINUM OXIDE COATING FOR AGGRESSIVE CLEANING AND REFINISHING ON MOST WOOD OR METAL SURFACES. WHEEL DIAMETER IS 1" X 1" 60 GRIT-FOR60190 >
Damar® 01122A Miniature Bulb, Miniature Flange B3.5 Lamp
Dixon® KRW25 Coupling Gasket, 2 in Nominal, 1-11/16 in ID x 2-7/16 in OD x 1/8 in THK, Rubber, Domestic
Dixon® KRW25 Coupling Gasket, 2 in Nominal, 1-11/16 in ID x 2-7/16 in OD x 1/8 in THK, Rubber, Domestic
Hougen® Rotabroach® 12214 12000 Annular Cutter, 7/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Hougen® Rotabroach® 12132 12000 Annular Cutter, 1 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.

