ELECTROLINE 1/2"-13 MALLEABLE BEAM C-CLAMPS ELE L-289
C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
-
BrandMadison Electric
-
UPC784297140297
-
Manufacturer Part Number29
-
CountryUSA
-
Load Capacity200 lb
-
FinishZinc Plated
-
MaterialMalleable Iron/Steel
-
TypeC-Type
-
Specifications2-1/2 in Trade Size, 1-3/16 in Jaw Opening, 1/2-13 Hole, Square Head Screw
- Side and bottom tapped holes
-
UNSPSC31162905
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed|cCSAus Certified
-
Warranty30 Days
-
Catalog
Recently Viewed
C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
1-1/2" X 3" SCHEDULE 80 BLACK NIPPLE-FIT11/2X3XHBN >
Threaded studs are available in 1/4-20 and 3/8-16 thread diameters with a variety of external thread and shank lengths for use in concrete, concrete over steel deck, concrete masonry walls and steel. They are used for applications where it may be desirable to remove the fixture or where shimming may be required or for suspending small diameter pipe (e.g. water lines, sprinkler systems). Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool providing guidance during the driving operation. Rod hangers and post nut hanger clips are available for suspending mechanical and electrical components from concrete and steel. They have an internally threaded clip or post nut designed to accept either 1/4-20 or 3/8-16 threaded rod. For the electrical trade, BX and EMT (electrical metallic tubing) conduit clips are provided in various sizes for attaching conduit to base materials where easy removal is not a requirement. Rebar basket clips are typically used in highway construction and paving applications to hold the support baskets for the reinforcing bars in place while the concrete is being poured.
Disposable filters are designed for protection of furnace and central air units in residential and light commercial applications. Construction of both models is identical except for the media retainer. The EZ Flow® features a metal media retainer on the downstream side while the EZ Flow® II has no media retainer. Instead, the media itself is adhered directly to the frame for non-metallic applications.
1/4" X CLOSE SCHEDULE 80 BLACK NIPPLE-FIT1/4XCLXHBN >
