28-901 ARMSTRONG TOOLS
7-PC INCH/SAE GEARWRENCH SETS-ARS28901>
Recently Viewed
7-PC INCH/SAE GEARWRENCH SETS-ARS28901>
Square-D 50-AMP 3-POLE 24-VOLT CONTACTORS SQU 8910-DPA-53-V-14
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 50 ampere and a resistive rating of 65 amperes. It also has a 3 HP at 115 VAC single phase, 10 HP at 230 VAC single phase and 15 HP at 230 VAC three phase, 30 HP at 460 VAC three phase and 30 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 24 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 4.06 inches by 2.56 inches and 3.67 tall. These contactors are UL component recognized and CSA certified.
Gates® Power Transmission 10-IDL-BRAK Idler Bracket, For Use With 8 mm Pitch Idler Sprockets, 4.25 in OD Flat Idler Pulleys, 2012-Idl-Bush, 2517-Idl-Bush and 20-Idl-Bush Idler Bushing, 67.8 N-m Arm Bolt Torque, 17.6 N-m Set Screw Torque, 3/4-16 Threaded
Idlers are used to take-up extra belt length and provide adjustment for tensioning belt drives. Idler pulleys and sprockets can alter belt paths and clear obstructions.
THE ARC ABRASIVES MOUNTED FLAP WHEEL IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: GRINDING, DEBURRING AND FINISHING. PERFECT FOR USE ON MILD STEEL AND ALUMINUM.
-ARC11289 >
50090 Drive Pin With A .300 Diamter Head Designed For Permanently Fastening A Fixture
DRIVE PIN WITH A .300 DIAMTER HEAD DESIGNED FOR PERMANENTLY FASTENING A FIXTURE TO CONCRETE-PWR50090 >
1-1/2 TON 20' LIFT LEVER HOIST-JET187613>
