Proto® J6232 Torque Multiplier, 20.2 Gear Ratio, 18.5:1 Torque Ratio, 1/2 in Square Female x 1 in Square Male Drive, 20 in OAL, 173 ft-lb Max, 3200 ft-lb Max, Tubular Bar
Proto® J6232 Torque Multiplier, 20.2 Gear Ratio, 18.5:1 Torque Ratio, 1/2 in Square Female x 1 in Square Male Drive, 20 in OAL, 173 ft-lb Max, 3200 ft-lb Max, Tubular Bar
-
BrandProto®
-
UPC662679130411
-
Manufacturer Part NumberJ6232
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialBi-Metal
-
Gear Ratio20.2
-
Head Size4-1/32 in L x 6-3/8 in D
-
Drive Size1/2 in Square Female x 1 in Square Male
-
Overall Length20 in
- Standard torque accuracy is +/- 5% of reading
- Reaction system tubular reaction bar
- Single stage planetary gear system
- Self-contained, 3-position anti-backlash device
- 5 deg increments angle of turn protractor
- 14-1/8 in L handle
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4221060 |
| Berkshire eSupply | KP4221060 |
| Berkshire eSupply | KP4221060 |
| Berkshire eSupply | KP4221060 |
-
Alternative Part Number14762957
-
UNSPSC27111715
-
IDEA Index ID14762957
-
Package Description1/BX
-
Standards/ApprovalsNIST Certified
-
WarrantyLifetime
Recently Viewed
Proto® J6232 Torque Multiplier, 20.2 Gear Ratio, 18.5:1 Torque Ratio, 1/2 in Square Female x 1 in Square Male Drive, 20 in OAL, 173 ft-lb Max, 3200 ft-lb Max, Tubular Bar
Proto® J6232 Torque Multiplier, 20.2 Gear Ratio, 18.5:1 Torque Ratio, 1/2 in Square Female x 1 in Square Male Drive, 20 in OAL, 173 ft-lb Max, 3200 ft-lb Max, Tubular Bar
3/8"-HOSE X M16X1.5 FEM. DIN LIGHT-DAY16DIN96SB>
2-3/4"-ID X 2-7/8"-OD VITON O-RING-CUS039VITON>
3/8"-HOSE X M16X1.5 MALE DIN LIGHT-DAY16DINM6SB>
8 TON AIR ACTUATED CRANE JACK - OMG44981C>
Dichtomatik 67004475 O-Ring, 65 mm ID x 73 mm OD, Nitrile Rubber, 70 Shore A Durometer, Domestic
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
