Proto Tools 3/8"DR RATCHETING TORQUE WRENCH PRO J-6006-C
Proto® J6006C C Series Micrometer Torque Wrench, 3/8 in Drive, 16 to 80 ft-lb, Ratcheting Head, 0.5 ft-lb Graduation, 15-1/2 in OAL, ASME B107.14M
-
BrandProto®
-
UPC662679135935
-
Manufacturer Part NumberJ6006C
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialSteel
-
Torque Range16 to 80 ft-lb
-
Minimum Number of Cycles50000
-
Graduations0.5 ft-lb
-
Accuracy+/-3% CW, +/-6% CCW
-
Rotation TypeCW/CCW
-
Handle TypeKnurled/Screw-On End Cap
-
Head TypeRatcheting
-
SeriesC Series
-
SettingAutomatic Reset
-
Indicator TypeAudible Click
-
Specifications MetASME B107.14M
-
Drive Size3/8 in
-
Overall Length15-1/2 in
- Calibrated to +/-4% in clockwise direction and +/-6% counter clockwise direction at 20% to 100% of full scale
- Calibration is accomplished by mechanical loading each wrench in a horizontal position and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
- This Proto® torque wrench is made from high grade steel for strength and durability
- Positive locking mechanism to dial and lock in desired torque
- Thin head design to allow access in tight areas
- Calibrated To Plus or Minus 3% In Clockwise Direction And Plus Or Minus 6% In Counter Clockwise Direction
- For strength and durability
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | KP4220845 |
-
UNSPSC27111715
-
Standards/ApprovalsASME B107.14
Recently Viewed
Proto® J6006C C Series Micrometer Torque Wrench, 3/8 in Drive, 16 to 80 ft-lb, Ratcheting Head, 0.5 ft-lb Graduation, 15-1/2 in OAL, ASME B107.14M
2-1/2" FLANGE CARTRIDGE UNIT-FYHUCFCX1340E >
BEARINGS-"FAF" BEARINGS-CHIRA100RRB>
ISOSTATIC™ Century® 104969 Round Bore Sleeve Bearing, 2-15/16 in Dia Bore, 3-7/16 in OD, 6-1/2 in W
Drillco 735A132C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
30209 Metric Tapered Roller Bearing
METRIC TAPERED ROLLER BEARING SETS-SNR30209>
