Proto® J6133F Dual Scale Dial Torque Wrench, 3/4 in Drive, 120 to 600 ft-lb, Fixed/Ratcheting Head, 46-1/2 in OAL, ASME B107.14M, ISO 6789, 10 ft-lb Graduation
Proto® J6133F Dual Scale Dial Torque Wrench, 3/4 in Drive, 120 to 600 ft-lb, Fixed/Ratcheting Head, 46-1/2 in OAL, ASME B107.14M, ISO 6789, 10 ft-lb Graduation
-
BrandProto®
-
UPC662679135409
-
Manufacturer Part NumberJ6133F
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialAluminum/Steel
-
Torque Range120 to 600 ft-lb
-
Minimum Number of Cycles5000
-
TypeDual Scale
-
Graduations10 ft-lb
-
Accuracy+/-3 %
-
Rotation TypeCW/CCW
-
Handle TypePlain Grip
-
Head TypeFixed/Ratcheting
-
Specifications MetASME B107.14M, ISO 6789
-
Drive Size3/4 in
-
Overall Length46-1/2 in
- Accurate to +/-4% of torque reading in both directions at 20 to 100% of full scale
- Industrial all steel or aluminum torque transfer components
- High alloy torsion drive design
- Dual scale (english/metric) with clockwise and counterclockwise operation - fewer wrenches need to complete job
- Memory needles are standard on all wrenches except electric light models
- Easy-to-read, high contrast scale
- Laser marked serial number for traceability
- Torsion drive design - accuracy not effected by hand position
- Electric light and buzzer on 1000 ft-lb and 2000 ft-lb models
- Extension handle for easy force application
- 0 to 50 through 0 to 1000 ft-lb dual reading
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4220970 |
| Berkshire eSupply | KP4220970 |
| Berkshire eSupply | KP4220970 |
| Berkshire eSupply | KP4220970 |
-
UNSPSC27111715
-
IncludesBlow Molded Box and Removable Extension Handle
-
Package Description1/BX
-
Standards/ApprovalsJIS B4650|NIST Certified|CW Certified
Recently Viewed
Proto® J6133F Dual Scale Dial Torque Wrench, 3/4 in Drive, 120 to 600 ft-lb, Fixed/Ratcheting Head, 46-1/2 in OAL, ASME B107.14M, ISO 6789, 10 ft-lb Graduation
Proto® J6133F Dual Scale Dial Torque Wrench, 3/4 in Drive, 120 to 600 ft-lb, Fixed/Ratcheting Head, 46-1/2 in OAL, ASME B107.14M, ISO 6789, 10 ft-lb Graduation
#3 X 3" Taper Pins
84" STEEL FENCE/BARB WIRE POST-JWH718815>
ISOSTATIC™ Oilube® 402408 Round Bore Thrust Washer, 3/8 in ID x 3/4 in OD, 1/16 in THK, 10 to 175 deg F, SAE 841 Powdered Metal/Oil Impregnated Bronze
ISOSTATIC™ Oilube® 402408 Round Bore Thrust Washer, 3/8 in ID x 3/4 in OD, 1/16 in THK, 10 to 175 deg F, SAE 841 Powdered Metal/Oil Impregnated Bronze
Dichtomatik N70151 O-Ring, 151 Dash Number, 2.987 in ID x 3.193 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR150031 >
