Proto® J6125F Dual Scale Dial Torque Wrench, 1/2 in Drive, 50 to 250 ft-lb, Fixed/Ratcheting Head, 21-1/2 in OAL, ASME B107.14M, ISO 6789, 5 ft-lb Graduation
Proto® J6125F Dual Scale Dial Torque Wrench, 1/2 in Drive, 50 to 250 ft-lb, Fixed/Ratcheting Head, 21-1/2 in OAL, ASME B107.14M, ISO 6789, 5 ft-lb Graduation
-
BrandProto®
-
UPC662679135379
-
Manufacturer Part NumberJ6125F
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialAluminum/Steel
-
Torque Range50 to 250 ft-lb
-
Minimum Number of Cycles5000
-
TypeDual Scale
-
Graduations5 ft-lb
-
Accuracy+/-3%
-
Rotation TypeCW/CCW
-
Handle TypePlain Grip
-
Head TypeFixed/Ratcheting
-
Specifications MetASME B107.14M, ISO 6789
-
Drive Size1/2 in
-
Overall Length21-1/2 in
- Accurate to +/-3% of torque reading in both directions at 20 to 100% of full scale
- Industrial all steel or aluminum torque transfer components
- High alloy torsion drive design
- Dual scale (English/metric) with clockwise and counterclockwise operation - fewer wrenches need to complete job
- Memory needles are standard on all wrenches except electric light models
- Easy-to-read, high contrast scale
- Laser marked serial number for traceability
- Torsion drive design - accuracy not effected by hand position
- Electric light and buzzer on 1000 ft-lb and 2000 ft-lb models
- 0 to 50 through 0 to 1000 ft-lb dual reading
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1ARR2 |
| Grainger | 1ARR2 |
| Grainger | 1ARR2 |
-
UNSPSC27111715
-
IncludesBlow Molded Box
-
Standards/ApprovalsJIS B4650|NIST Certified|CW Certified
Recently Viewed
Proto® J6125F Dual Scale Dial Torque Wrench, 1/2 in Drive, 50 to 250 ft-lb, Fixed/Ratcheting Head, 21-1/2 in OAL, ASME B107.14M, ISO 6789, 5 ft-lb Graduation
Proto® J6125F Dual Scale Dial Torque Wrench, 1/2 in Drive, 50 to 250 ft-lb, Fixed/Ratcheting Head, 21-1/2 in OAL, ASME B107.14M, ISO 6789, 5 ft-lb Graduation
3/8" X 3/4" USS Thumb Screws
Weller® PSI1 PSI Replacement Single Flat Soldering Tip, For Use With PSI100 Butane Soldering Iron, 16.26 mm L x 0.8 mm W, 850 deg F Operating
Weller® PSI1 PSI Replacement Single Flat Soldering Tip, For Use With PSI100 Butane Soldering Iron, 16.26 mm L x 0.8 mm W, 850 deg F Operating
The RT250 is an electrical receptacle tester that tests the wiring conditions at an electrical outlet and inspects GFCI devices. The LCD displays the voltage, identifies the wiring fault, and the time required to trip a GFCI device. It is designated for use with North American 3-wire 120V electrical outlets.
1" X 2" USS GR-8 Hex Head Capscrew
BBI 087541 Partially Threaded Cap Screw, 3/4-10, 10 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087541 Partially Threaded Cap Screw, 3/4-10, 10 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
