Proto Tools 36-MM STRIKING WRENCHES PRO J-2636-SW-M
Proto® J2636SWM Heavy Duty Striking Wrench, Metric, 36 mm Box End Wrench, 12 Points, 305 mm OAL, 25 mm THK Box End, Black Oxide
-
BrandProto®
-
UPC662679120788
-
Manufacturer Part NumberJ2636SWM
-
CountryUSA|Canada
-
Finish/CoatingBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
TypeHeavy Duty
-
Handle TypeOffset/Short
-
Wrench Opening36 mm
-
Wrench TypeBox End
-
Number of Points12
-
Specifications MetFederal GGG-W-636E
-
Offset Angle45 deg
-
Offset Size38 mm
-
Overall Length305 mm
-
Box End Thickness25 mm
-
Box End Width56 mm
- Large striking surface for surer blow contact and more efficient transmittal of force to fastener
- Short handle permits use in close quarters
- Box opening designed to remain on fastener when wrench is struck
- Heavy box walls provide greater torque transmission
- Offset handle clears obstructions
- Non-reflective black oxide finish for use where non-plated products are required
- 12 point box end allows for fine indexing, helping improve speed and access
- Fits most 4, 6 and 12 point fasteners
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1APL7 |
-
UNSPSC27111725
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Catalog
Recently Viewed
Proto® J2636SWM Heavy Duty Striking Wrench, Metric, 36 mm Box End Wrench, 12 Points, 305 mm OAL, 25 mm THK Box End, Black Oxide
MORSE® 32705 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
Browning® 1296367 T35L Automatic Torque Limiter, 5/8 in Finished Bore, 3-1/2 in OD, 1800 in-lb (1-Spring)/3000 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
H-10-C CHAMPION SPARK PLUG - CSP844>
CRC® 05432 Diesel Fuel Therapy® Combustible Diesel Fuel Conditioner and Injector Cleaner, 1 qt Bottle, Liquid Form, Dark Amber, Diesel Fuel #2, Stoddard Solvent, Solvent Naphtha (Petroleum), Heavy Arom, 1, 2, 4-Trimethylbenzene, Naphthalene
Top-Tier Cleanup w/max treat. Excellent winter protection. Adds Lubricity to low sulfur fuel. Prevents fuel gelling. Lowers pour point. OK for Biodiesel. Increases MPG. Cleans injectors. Prevents corrosion. Improves power. Reduces smoke. Stabilizes fuel.
ALFAGOMMA® B-0808-FO45 B Series One-Piece Hose Fitting, 1/2 in Hose, 13/16-16 Connection, Hose x Female End Style, 47.1 mm Cutoff Allowance, Import
