Proto Tools 2-5/16" 12-PT STRIKING WRENCHES PRO J-2637-SW
Proto® J2637SW Heavy Duty Striking Wrench, Imperial, 2-5/16 in Box End Wrench, 12 Points, 13-1/2 in OAL, 1-1/2 in THK Box End, Black Oxide
-
BrandProto®
-
UPC662679120795
-
Manufacturer Part NumberJ2637SW
-
CountryUSA|Canada
-
Finish/CoatingBlack Oxide
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeHeavy Duty
-
Handle TypeOffset/Short/Straight
-
Wrench Opening2-5/16 in
-
Wrench TypeBox End
-
Number of Points12
-
Specifications MetFederal GGG-W-636E
-
Offset Angle45 deg
-
Offset Size2 in
-
Overall Length13-1/2 in
-
Box End Thickness1-1/2 in
-
Box End Width3-3/8 in
- Large striking surface for surer blow contact and more efficient transmittal of force to fastener
- Short handle permits use in close quarters
- Box opening designed to remain on fastener when wrench is struck
- Heavy box walls provide greater torque transmission
- Straight handle design helps prevent the wrench from cocking when struck
- Offset handle clears obstructions
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4216585 |
| Berkshire eSupply | KP4216585 |
-
UNSPSC27111725
-
Standards/ApprovalsUS Federal Specification GGG-W-636E
-
Catalog
Recently Viewed
Proto® J2637SW Heavy Duty Striking Wrench, Imperial, 2-5/16 in Box End Wrench, 12 Points, 13-1/2 in OAL, 1-1/2 in THK Box End, Black Oxide
Littelfuse® POWR-GARD® NLN600 Fast Blow One Time Fuse, 600 A, 250 V AC/DC, 50 kA Interrupt, Class: K5, Cartridge Body
NLN series fuses provide low cost protection for general purpose feeder and branch circuits when available short circuit currents are less than 50000 A. They replace all Class H fuses which have only a 10000 A interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian "Code" fuses specifically designed to meet Canadian electrical code type P fuse requirements for residential use. They have a 10000 A interrupting rating. However, to obtain the added benefits of time delay, current limitation and higher interrupting rating, consider the use of POWR-PRO® IDSR Indicator fuses for circuits between 250 and 600 V. The user gets all the benefits of time delay RK5 fuses plus the added benefits of a n indicating fuse that tells when it has opened. complete information on these fuses may be found in the POWR-PRO® section of this catalog. for circuits upto 250 V, see FLNR fuses in this section of the catalog.
Hubbell Wiring Device-Kellems NHC1022 NHC 90 deg Form 2 Standard Cord Connector, 1/2 in MNPT Trade, (1) Conductors, 0.25 to 0.38 in Cable Openings, Aluminum, Machined
Hubbell® has the broadest line and the widest choice of materials in the industry. NPT hub sizes from 1/4 to 3 in straight male end, 90 deg, 45 deg, female and underground feed connectors. They are available in your choice of aluminum, plated steel, nylon and stainless steel.
-BRWDS60P17 >
SMOKING URNS-RBM2585>
Gardner Bender GMT-318 6-Function 14-Range 15-Position Analog Multimeter, 10 to 500 V AC, 10 to 500 V DC, 250 mA, 1 to 100 Ohm, -20 to 56 dB, 1.5 V and 9 V Measuring, 500 V AC/DC, 250 mA, 50 kOhm, Analog Display
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. Multimeter tests AC volts, DC volts, batteries, DC amps, resistance and transistor gain. The fuse and diode are protected. Equipped with 1 year warranty and tri-lingual instruction manual.
