Proto® J3568 Ultra Thin Pattern Service Wrench, 2-1/8 in Wrench, Federal GGG-W-636E, Imperial, 30 deg Offset, 8-1/2 in OAL, Alloy Steel, Satin
Stanley® Proto® was the first company to market the combination wrench in the United States in 1933. Since then, we have greatly expanded our line of wrenches and developed a range of new products. Our line now includes standard, extra long and short combination, flex head, open end, angle head, box, deep offset box, ratcheting box, obstruction, adjustable, flare nut, striking, slugging, construction, spanner and pipe wrenches. In other words, we have a wrench for nearly any fastener.
-
BrandProto®
-
UPC662679052225
-
Manufacturer Part NumberJ3568
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
TypeUltra Thin Pattern
-
Handle TypeOval/Short
-
Head Angle30 deg
-
Head Thickness5/16 in
-
Head Width3-1/2 in
-
Wrench Opening2-1/8 in
-
Specifications MetFederal GGG-W-636E
-
Offset Angle30 deg
-
Overall Length8-1/2 in
- Satin finish provides corrosion resistance and a slip-resistant grip
- 30 deg angle head allows access to difficult to reach fasteners
- Short shank allows for use in confined spaces
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 65210320 |
| MSC | 65210320 |
-
UNSPSC27111714
-
Package DescriptionEACH
-
Standards/ApprovalsFederal Specification GGG-W-636E
-
Catalog
Recently Viewed
Proto® J3568 Ultra Thin Pattern Service Wrench, 2-1/8 in Wrench, Federal GGG-W-636E, Imperial, 30 deg Offset, 8-1/2 in OAL, Alloy Steel, Satin
Stanley® Proto® was the first company to market the combination wrench in the United States in 1933. Since then, we have greatly expanded our line of wrenches and developed a range of new products. Our line now includes standard, extra long and short combination, flex head, open end, angle head, box, deep offset box, ratcheting box, obstruction, adjustable, flare nut, striking, slugging, construction, spanner and pipe wrenches. In other words, we have a wrench for nearly any fastener.
Apex® 954-C-2X Power Drive Bit, #2 Square Recessed Point, 6 in OAL, Steel
MORSE® 14522 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, G Drill - Letter, 0.261 in Drill - Decimal Inch, 135 deg Point Angle, HSS
MORSE® 14522 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, G Drill - Letter, 0.261 in Drill - Decimal Inch, 135 deg Point Angle, HSS
Browning® 767486 VTWS 200 Non-Expansion Normal Duty Take-Up Ball Bearing Unit, 2-3/16 in Dia Bore, 6-27/32 in L x 2-1/2 in W x 5-3/4 in H, 9752 lb Dynamic/6601 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Morse® 465704 TL Series Torque Limiter, 7/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
COILHOSE PNUEMATIC PRODUCTS CL-3114-08-04 8-MM X 1/4" -FBSPP Connectors
CL31140804 by Coilhose | COILOCK Metric Push-To-Connect Fitting | Female Connector | 8mm Tube OD x 1/4" Female BSPP | Straight | Nickel-Plated Brass
