Armstrong® 11-853 Crowfoot Wrench, 9/16 in Open End Wrench, 3/8 in Drive, 1.49 in OAL, ASME B107.21, Polished Chrome
Armstrong® 11-853 Crowfoot Wrench, 9/16 in Open End Wrench, 3/8 in Drive, 1.49 in OAL, ASME B107.21, Polished Chrome
-
BrandArmstrong®
-
UPC781412118537
-
Manufacturer Part Number11-853
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
Handle Size0.63 in W x 0.44 in THK
-
Head Thickness0.27 in
-
Head Width1.13 in
-
Wrench Opening9/16 in
-
Wrench TypeOpen End
-
Specifications MetASME B107.21
-
Drive Size3/8 in
-
Overall Length1.49 in
- Crowfoot wrenches provide access to hard-to-reach fasteners and fittings by attaching them to a drive tool
- Open end crow foot wrenches have a thinner head and are used to grip hard-to reach fasteners and fittings
- Full polish chrome finish provides smooth edges with a high luster
- Manufactured from high alloy steel using the most up-to-date manufacturing process and heat treat for greater strength and durability
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 00607556 |
-
UNSPSC27111756
-
Standards/ApprovalsUS Federal Specification GGG-W-1507b
Recently Viewed
Armstrong® 11-853 Crowfoot Wrench, 9/16 in Open End Wrench, 3/8 in Drive, 1.49 in OAL, ASME B107.21, Polished Chrome
Armstrong® 11-853 Crowfoot Wrench, 9/16 in Open End Wrench, 3/8 in Drive, 1.49 in OAL, ASME B107.21, Polished Chrome
ARC ABRASIVES TYPE R QUICK LOK IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: STOCK REMOVAL, DEBURRING, AND BLENDING. PERFECT FOR USE ON MILD STEEL AND ALUMINUM
ARC319145 >
With a spindle-less design, the Wilton® Lever Clamps offer a time saving method of clamping your welding work pieces. Torque down on the Wilton® Blue Aluminum handle for maximum force and simply loosen by squeezing the Quick-Trigger release.
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications.
Crosby® 1013860 S-643 1-1/4 X 5 Weldless Ring, 1-1/4 x 5 in Trade, 17000 lb Load, Forged Carbon Steel, Self-Colored
Crosby® 1013860 S-643 Weldless Ring, 1-1/4 x 5 in Trade, 17000 lb Load, Forged Carbon Steel, Self-Colored
11-GROOVE BANDED 5-V-2500 V-BELT - PIX5V2500/11>
