Proto® J4936CF Crowfoot Wrench, 1-1/8 in Wrench, 3/8 in Drive, 2-7/32 in OAL, ASME B107.21, Full Polished
Proto® J4936CF Crowfoot Wrench, 1-1/8 in Wrench, 3/8 in Drive, 2-7/32 in OAL, ASME B107.21, Full Polished
-
BrandProto®
-
UPC662679978426
-
Manufacturer Part NumberJ4936CF
-
CountryUSA|Canada
-
Finish/CoatingFull Polished
-
MaterialSteel
-
Measurement SystemImperial
-
Wrench Opening1-1/8 in
-
Specifications MetASME B107.21
-
Drive Size3/8 in
-
Overall Length2-7/32 in
- Crowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reach
- Anti-slip design open end (ASD)
- The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
- Broad size range ensures the right tool for the application
- Full polish finish provides corrosion resistance and easy-to-clean surfaces
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4218160 |
| Berkshire eSupply | KP4218160 |
-
UNSPSC27111706
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.21
-
Catalog
Recently Viewed
Proto® J4936CF Crowfoot Wrench, 1-1/8 in Wrench, 3/8 in Drive, 2-7/32 in OAL, ASME B107.21, Full Polished
Proto® J4936CF Crowfoot Wrench, 1-1/8 in Wrench, 3/8 in Drive, 2-7/32 in OAL, ASME B107.21, Full Polished
Proto® J4920CF Crowfoot Wrench, 5/8 in Wrench, 3/8 in Drive, 1-1/2 in OAL, ASME B107.21, Full Polished
Proto® J4920CF Crowfoot Wrench, 5/8 in Wrench, 3/8 in Drive, 1-1/2 in OAL, ASME B107.21, Full Polished
Proto® J4930FL Flare Nut Crowfoot Wrench, 15/16 in Wrench, 3/8 in Drive, 12 Points, ASME B107.21, Full Polished
Proto® J4930FL Flare Nut Crowfoot Wrench, 15/16 in Wrench, 3/8 in Drive, 12 Points, ASME B107.21, Full Polished
3/8" X 6" TURNBUCKLE WITH A HOOK ON BOTH SIDES 1030057-CROHG2233/8X6 >
Proto® J5328MCF Crowfoot Wrench, 28 mm Wrench, 1/2 in Drive, 3 in OAL, ASME B107.21, Full Polished
Proto® J5328MCF Crowfoot Wrench, 28 mm Wrench, 1/2 in Drive, 3 in OAL, ASME B107.21, Full Polished
NACHI NJ207 NJ200 Cylindrical Roller Bearing, 35 mm Dia Bore, 72 mm OD, 1 Row, 17 mm W, 33500 N Dynamic/31500 N Static Load
Cylindrical Roller Bearing – ‘NJ’ CONFIGURATION Cylindrical Roller Bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in assembly/disassembly of components. The ‘NJ’ Type bearings has shoulders on both sides of the outer ring and one shoulder on the inner ring. This allows the bearing to accept light axial loads in one direction. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers.
