Proto Tools 32-MM 12-PT LONG COMB/WRENCHES PRO J-1232-M-ASD
Proto® TorquePlus™ J1232MASD Anti-Slip Design Combination Wrench, Metric, 32 mm, 12 Points, 15 deg Offset, 16 in OAL, Alloy Steel, Satin, ASME B107.100
-
BrandProto®
-
UPC662679073350
-
Manufacturer Part NumberJ1232MASD
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Throat Depth38.1 mm
-
Measurement SystemMetric
-
TypeAnti-Slip Design
-
Handle TypeOval/Slip Resistant Grip/Straight
-
Head Angle15 deg
-
Wrench Opening32 mm
-
Wrench TypeSpline
-
Number of Points12
-
Specifications MetASME B107.100
-
Offset Angle15 deg
-
Open End Thickness13.1 mm
-
Open End Width64 mm
-
Overall Length16 in
-
Box End Thickness17.9 mm
-
Box End Width44.8 mm
- Satin finish provides corrosion resistance and a slip-resistant grip
- 12 point box end allows for fine indexing, helping to improve speed and access
- Fits 4, 6 and 12 point fasteners
- Anti-slip design (ASD) open end
- Box ends incorporate the TorquePlus™ system
- Locking groove to help prevent slippage
- Arched surface which spreads the force over a 400% larger contact area to help prolong life
- No ribs or serrations to damage fasteners
- Allows upto 15% more torque to be applied to the fastener
- Reduces risk of fastener rounding
- Provides a better grip on worn, rounded fasteners
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 449P35 |
| Grainger | 449P35 |
| Grainger | 449P35 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.100
Recently Viewed
Proto® TorquePlus™ J1232MASD Anti-Slip Design Combination Wrench, Metric, 32 mm, 12 Points, 15 deg Offset, 16 in OAL, Alloy Steel, Satin, ASME B107.100
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
10 TOOTH SPROCKETS FOR #80 CHAIN-BRWH8010X11/4 >
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
MORSE® 14914 1398 1-Stage Type C Heavy Duty Screw Machine Aircraft Drill, #32 Drill - Wire, 0.116 in Drill - Decimal Inch, 135 deg Point, HSS
GEARWRENCH® 9030 Open End Regular Length Combination Wrench, 15/16 in Wrench, 12 Points, 0/15 deg Offset, 13.114 in OAL, Alloy Steel, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
