GEARWRENCH® 9616N Open End Regular Length Reversible Combination Wrench, 16 mm Wrench, 12 Points, 15 deg Offset, 8.087 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
-
BrandGEARWRENCH®
-
UPC082171096167
-
Manufacturer Part Number9616N
-
CountryUSA|Canada
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemMetric
-
TypeOpen End Regular Length Reversible
-
Head Angle15 deg
-
Wrench Opening16 mm
-
Number of Geared Teeth72
-
Wrench TypeRatcheting
-
Number of Points12
-
Offset Angle15 deg
-
Open End Thickness0.346 in
-
Open End Width1.358 in
-
Overall Length8.087 in
-
Box End Thickness0.406 in
-
Box End Width1.201 in
- 72 tooth ratcheting box end needs a minimal 5 deg to move fasteners vs 30 deg for standard wrenches
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- Flexible head provides access to hard-to-reach bolts and fasteners
- Thin head and beam provide greater access in confined work areas
- Stubby beam length for when clearance is limited
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish easily wipes clean and resists corrosion
- Size conveniently stamped on the head and beam for quick identification
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 41YH27 |
| Grainger | 41YH27 |
| Grainger | 41YH27 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
GEARWRENCH® 9616N Open End Regular Length Reversible Combination Wrench, 16 mm Wrench, 12 Points, 15 deg Offset, 8.087 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
Milwaukee® 48-20-9045 SHOCKWAVE™ Single Ended Hammer Drill Bit, 3/4 in Drill Bit, 3/8 in 3-Flat Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 3-Flat Secure Grip™ shank, Milwaukee® Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with hammer drills/drivers. Available in diameters up to 1 inch.
Milwaukee® M12™ 48-20-7481 2-Cutter Single Tip Rotary Hammer Drill Bit, 9/16 in Drill Bit, 25/64 in SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6-1/2 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
RIDGID® 37895 Manual Threader Pipe Die, 2 in Conduit/Pipe, 2-11-1/2 NPT Thread, Right Thread, 4 Pieces, For Use With OO-R, 11-R, 12-R, O-R, Ratchet Threaders and 30A, 31A 3-Way Pipe Threaders, HSS
RIDGID® 37895 Manual Threader Pipe Die, 2 in Conduit/Pipe, 2-11-1/2 NPT Thread, Right Thread, 4 Pieces, For Use With OO-R, 11-R, 12-R, O-R, Ratchet Threaders and 30A, 31A 3-Way Pipe Threaders, HSS
4" GALVANIZED SINGLE WALL PIPE VENT CAP-JWH405323 >
5" GALVANIZED STEEL VENT PIPE CAP-JWH405350 >
