GEARWRENCH® 9614N Non-Capstop Open End Regular Length Reversible Combination Wrench, 14 mm Wrench, 12 Points, 15 deg Offset, 7.398 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
-
BrandGEARWRENCH®
-
UPC082171096143
-
Manufacturer Part Number9614N
-
CountryUSA|Canada
-
Finish/CoatingPolished Chrome
-
MaterialHigh Alloy Steel
-
Measurement SystemMetric
-
TypeNon-Capstop Open End Regular Length Reversible
-
Wrench Opening14 mm
-
Number of Geared Teeth72
-
Wrench TypeRatcheting
-
Number of Points12
-
Offset Angle15 deg
-
Open End Thickness0.327 in
-
Open End Width1.228 in
-
Overall Length7.398 in
-
Box End Thickness0.37 in
-
Box End Width1.035 in
- 72 tooth ratcheting box end needs a minimal 5 deg to move fasteners vs 30 deg for standard wrenches
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- Flexible head provides access to hard-to-reach bolts and fasteners
- Thin head and beam provide greater access in confined work areas
- Stubby beam length for when clearance is limited
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish easily wipes clean and resists corrosion
- Size conveniently stamped on the head and beam for quick identification
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 65963928 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
GEARWRENCH® 9614N Non-Capstop Open End Regular Length Reversible Combination Wrench, 14 mm Wrench, 12 Points, 15 deg Offset, 7.398 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
Browning® 3150992 SF Series Standard Duty Take-Up Frame, 9 in Travel, 14-1/2 in OAL, 4-1/16 in W Base, 13-1/2 in L Bolt Center-to-Center, 3-3/16 in W Bolt Center-to-Center
1-7/16" -TOP WIDTH VARIABLE SPEED BELT 68.6"-PIX2322V681 >
Browning® 1078203 Split Taper Bushing, 7/16 in Dia Bore, 1.57 in Small End/1.625 in Large End Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
5/8" SAE Stainless Steel Hex Jam Nuts
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA97K>
