GEARWRENCH® 9028D Open End Regular Length Combination Wrench, 7/8 in Wrench, 12 Points, 0/15 deg Offset, 11.476 in OAL, Alloy Steel, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
-
BrandGEARWRENCH®
-
UPC082171090288
-
Manufacturer Part Number9028D
-
CountryUSA|Canada
-
Finish/CoatingPolished Chrome
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
Head Angle15 deg
-
Box End Thickness0.512 in
-
Box End Width1.535 in
-
TypeOpen End Regular Length
-
Wrench Opening7/8 in
-
Wrench TypeRatcheting
-
Number of Points12
-
Offset Angle0/15 deg
-
Open End Thickness0.39 in
-
Open End Width1.811 in
-
Overall Length11.476 in
- 72-tooth ratcheting box end needs a minimal 5 to move fasteners versus 30 for standard wrenches
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- Thin head and beam provide greater access in confined work areas
- Size conveniently stamped on both ends of the beam for quick identification
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish easily wipes clean and resists corrosion
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 42102350 |
| Grainger | 6MHA2 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Specified|DIN Approved|Federal Torque Specified|CSA Approved
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
GEARWRENCH® 9028D Open End Regular Length Combination Wrench, 7/8 in Wrench, 12 Points, 0/15 deg Offset, 11.476 in OAL, Alloy Steel, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
4" X 1/16" X 5/8" CUTOFF WHEEL-ECU76410 >
3/8" G80 ALLOY LIFTING HOOKS 1027677
IDEAL ClearGlide Wire pulling lubricant is a polymer-based formula well suited for all electrical and datacom applications, and safe to use with all cable types. It is clear and colorless, and suitable for indoor as well as outdoor applications. This formula provides quick and easy clean up, and extraordinary lubricity for super-fast pulls. Its controlled evaporation rate is ideal for shorter runs. It remains stable over wide temperature ranges from 32°F to 180°F (0°C to 82°C) and dries to a semi-fluid film that won't clog conduit. It is convenient to apply by hand, brush, or pump, and is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. It comes in 1-qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
RIDGID® 49717 Manual Threader Pipe Die, 1 in Conduit/Pipe, 1-11-1/2 NPT Thread, Right Thread, For Use With OO-R, 11-R, 12-R, O-R, Ratchet Threaders and 30A, 31A 3-Way Pipe Threaders, HSS
RIDGID® 49717 Manual Threader Pipe Die, 1 in Conduit/Pipe, 1-11-1/2 NPT Thread, Right Thread, For Use With OO-R, 11-R, 12-R, O-R, Ratchet Threaders and 30A, 31A 3-Way Pipe Threaders, HSS
1-1/2" X 6-1/2" USS Socket Head Capscrew
