GEARWRENCH® 81655 Long Length Open End Combination Wrench, 7/16 in Wrench, 12 Points, 15 deg Offset, 7.29 in OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
-
BrandGEARWRENCH®
-
UPC099575816550
-
Manufacturer Part Number81655
-
CountryUSA|Canada
-
Finish/CoatingPolished Chrome
-
MaterialPremium Alloy Steel
-
Measurement SystemImperial
-
TypeLong Length Open End
-
Wrench Opening7/16 in
-
Number of Points12
-
Offset Angle15 deg
-
Open End Thickness0.236 in
-
Open End Width0.894 in
-
Overall Length7.29 in
-
Box End Thickness0.295 in
-
Box End Width0.685 in
- 15 offset for better access in tight spaces
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- Long pattern beam length for improved reach, leverage and torque
- Hard stamped size marking
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish easily wipes clean and resists corrosion
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 32TC41 |
| MSC | 75230045 |
| Fastenal | 0227594 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Catalog
Recently Viewed
GEARWRENCH® 81655 Long Length Open End Combination Wrench, 7/16 in Wrench, 12 Points, 15 deg Offset, 7.29 in OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Milwaukee® 48-20-5155 Heavy Duty Thick Wall Core Bit, 4 in Drill - Fraction, 4 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
