GearWrench® 86741 Combination Wrench, 5/16 in Wrench, 12 Points, 15 deg Offset, 5.709 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
-
BrandGEARWRENCH®
-
UPC995750674192
-
Manufacturer Part Number86741
-
CountryUSA
-
Finish/CoatingPolished Chrome
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
Handle TypeFlexible
-
Box End Thickness0.272 in
-
Box End Width0.697 in
-
Tether ReadyNo
-
Wrench Opening5/16 in
-
Number of Geared Teeth90
-
Wrench TypeRatcheting
-
Number of Points12
-
Specifications MetANSI/ASME
-
Offset Angle15 deg
-
Open End Thickness0.193 in
-
Open End Width0.665 in
-
Overall Length5.709 in
- 90-tooth ratcheting box end delivers a 4 swing arc to turn a fastener in tight spaces
- Flexible head provides access to hard-to-reach bolts and fasteners
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- 12-point ratcheting box-end for use on 6 or 12-point fasteners
- Longer, wider beam for improved reach, leverage, and comfort
- Large color-coded markings for easy size ID
- Bright, full polish chrome finish easily wipes clean and resists corrosion
- Bright, full polished chrome finish easily wipe clean and resist corrosion
-
UNSPSC27111713
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: This product contains or produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
-
WarrantyLimited Lifetime
Recently Viewed
GearWrench® 86741 Combination Wrench, 5/16 in Wrench, 12 Points, 15 deg Offset, 5.709 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
Greenlee® Slug-Buster® 126AV Round Replacement Conduit Die, Round Punch, 1 in Conduit/Pipe, Mild Steel, 10 ga
Greenlee® Slug-Buster® 126AV Round Replacement Conduit Die, Round Punch, 1 in Conduit/Pipe, Mild Steel, 10 ga
DeWALT® DWAF3PH2IR5 Screwdriver Bit, #2 Point Phillips® Point, 3.5 in OAL
GP® CH105 Chisel, Flat, 3/4 in Tip, 18 in OAL
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
GearWrench® 86950 Combination Wrench, 13/16 in Wrench, 12 Points, 15 deg Offset, 12 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
