Proto Tools 2-5/8" 12-PT COMBINATION WRENCHES PRO J-1284
Proto® J1284 Combination Wrench, 2-9/16 in Wrench, 12 Points, 15 deg Offset, 29-3/4 in OAL, Alloy Steel, Satin
-
BrandProto®
-
UPC662679001476
-
Manufacturer Part NumberJ1284
-
CountryUSA|Canada
-
Finish/CoatingSatin
-
MaterialAlloy Steel
-
Throat Depth2-5/8 in
-
Measurement SystemImperial
-
Handle TypeSlip Resistant Grip
-
Head Angle15 deg
-
Wrench Opening2-9/16 in
-
Number of Points12
-
Offset Angle15 deg
-
Open End Width4-3/4 in
-
Overall Length29-3/4 in
-
Box End Thickness1-5/8 in
-
Box End Width3-3/4 in
- Satin finish provides corrosion resistance and a slip resistant grip
- For use on extra large fasteners
- Forged heads with machined openings
- 12 point box end allows for fine indexing, helping to improve speed and access
- Fits 4, 6 and 12 point fasteners
- Box end is countersunk for easy application to the fastener
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 87029757 |
| MSC | 87029757 |
| MSC | 87029757 |
-
UNSPSC27111713
-
WarrantyLifetime
-
Catalog
Recently Viewed
Proto® J1284 Combination Wrench, 2-9/16 in Wrench, 12 Points, 15 deg Offset, 29-3/4 in OAL, Alloy Steel, Satin
7/16" USS/NC GR-5 Zinc Hex Nuts
Armstrong® 11-418 Standard Length Socket, 3/8 in Square Drive, 9/16 in, 8 Points
Milwaukee® 48-20-5030 Heavy Duty Thin Wall Core Bit, 1-3/4 in Drill - Fraction, 1.75 in Drill - Decimal Inch, Carbide
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
PAIR OF SIZE-13" RUBBER KNEE BOOTS-BOO995452 >
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
